np205 short vs long 32 spline input - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1985-GMC · 03-30-2015, 09:47 AM

Does anyone know where I can find a long version? I have a short version but I'm getting a custom adapter made for the nv4500 and figure 8 np205 and I need the other shaft. The short 32 seems to be more desirable of the two but I'm still having trouble finding the long 32 spline input. Thanks in advance!

ryanroo · 03-30-2015, 07:56 PM

off road design.

they will get about anything you need for a 205. anyone doing a nv4500 swap that is not using the spacer would have one too i would think.

1985-GMC · 03-31-2015, 12:21 AM

I'll look again and see what they have available. Thanks

ryanroo · 03-31-2015, 08:07 AM

no problem. you may call. they are very helpful and may not list it as most people are going the other direction.

obijuan · 03-31-2015, 02:28 PM

That is not a reproduced part so if they have it, it will be a used one. Hit or miss on the long gears. I'll buy your short gear if it comes to it.
The long gears come up on pirate4x4 from time to time.

why the custom adapter? Have you seen this? You can use your tcase with the short gear and this plate All with the stock 4x4 trams adapter.
http://www.northwestfab.com/GM-NP205...pter_p_18.html

03-30-2015, 09:47 AM	#1
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	np205 short vs long 32 spline input Does anyone know where I can find a long version? I have a short version but I'm getting a custom adapter made for the nv4500 and figure 8 np205 and I need the other shaft. The short 32 seems to be more desirable of the two but I'm still having trouble finding the long 32 spline input. Thanks in advance! __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

03-30-2015, 07:56 PM	#2
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: np205 short vs long 32 spline input off road design. they will get about anything you need for a 205. anyone doing a nv4500 swap that is not using the spacer would have one too i would think. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

03-31-2015, 12:21 AM	#3
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: np205 short vs long 32 spline input I'll look again and see what they have available. Thanks __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

03-31-2015, 08:07 AM	#4
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: np205 short vs long 32 spline input no problem. you may call. they are very helpful and may not list it as most people are going the other direction. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

03-31-2015, 02:28 PM	#5
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: np205 short vs long 32 spline input That is not a reproduced part so if they have it, it will be a used one. Hit or miss on the long gears. I'll buy your short gear if it comes to it. The long gears come up on pirate4x4 from time to time. why the custom adapter? Have you seen this? You can use your tcase with the short gear and this plate All with the stock 4x4 trams adapter. http://www.northwestfab.com/GM-NP205...pter_p_18.html Last edited by obijuan; 03-31-2015 at 02:36 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.