Need help... seeking a member with a diagram - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 04-07-2015, 11:50 AM

Ok so i need a diagram of the parking brake cable assy`s for a 67 c10 short stepper. i was installing the engine/tranny combo, (slicked up 350/700r combo)
and while lifting the tranny with a tranny jack to slide the trans crassmember underneath it, my brake cable got caught on top of the trans and snapped on me!!

so now i need to replace that cable Thats where a diagram could come in handy, thanks guys
mike

**LockDoc** · 04-07-2015, 02:08 PM

-
I don't know if this will help or not. It came up with a quick search. They should all be similar.

http://67-72chevytrucks.com/vboard/s...d.php?t=457505

LockDoc

**VetteVet** · 04-07-2015, 02:09 PM

Hey mike here's a picture of the underside front of the cable. The upper cable goes to the brake arm and the lower cable connects to a rod that goes forward thru the frame. Then the rear cables go to the rear brakes.

I think there is a real nice diagram in the free LMC catalog.

Name: 039.jpg
Views: 100
Size: 50.7 KB

**michael bustamante** · 04-07-2015, 02:34 PM

yup the one that broke is the one that goes from side to side the the frame then hooks up to the rear end cables. that long one that bends to a U
man thats some nice detail on that pic.
any one have an extra theyd like out of their garage?

**LockDoc** · 04-07-2015, 02:47 PM

Quote:

Originally Posted by michael bustamante

yup the one that broke is the one that goes from side to side the the frame then hooks up to the rear end cables. that long one that bends to a U
man thats some nice detail on that pic.
any one have an extra theyd like out of their garage?

They should be available through one of the online vendors. Be sure and measure your old one before you pitch it....

LockDoc

**michael bustamante** · 04-07-2015, 02:56 PM

good deal. thanks for your help

04-07-2015, 11:50 AM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Need help... seeking a member with a diagram Ok so i need a diagram of the parking brake cable assy`s for a 67 c10 short stepper. i was installing the engine/tranny combo, (slicked up 350/700r combo) and while lifting the tranny with a tranny jack to slide the trans crassmember underneath it, my brake cable got caught on top of the trans and snapped on me!! so now i need to replace that cable Thats where a diagram could come in handy, thanks guys mike __________________ 1967custom

04-07-2015, 02:08 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: Need help... seeking a member with a diagram - I don't know if this will help or not. It came up with a quick search. They should all be similar. http://67-72chevytrucks.com/vboard/s...d.php?t=457505 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-07-2015, 02:09 PM	#3
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,718	Re: Need help... seeking a member with a diagram Hey mike here's a picture of the underside front of the cable. The upper cable goes to the brake arm and the lower cable connects to a rod that goes forward thru the frame. Then the rear cables go to the rear brakes. I think there is a real nice diagram in the free LMC catalog. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

04-07-2015, 02:34 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Need help... seeking a member with a diagram yup the one that broke is the one that goes from side to side the the frame then hooks up to the rear end cables. that long one that bends to a U man thats some nice detail on that pic. any one have an extra theyd like out of their garage? __________________ 1967custom

04-07-2015, 02:56 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Need help... seeking a member with a diagram good deal. thanks for your help __________________ 1967custom

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.