Anyone use Woodall products???

[Dustmaker65]

While searching the "old" posts about replacement panels, I found Woodall Industries. Could not find alot about them though...

So anyone have any experience with their products? Doors, Fenders, Hoods, Patch panels...

[LockDoc]

Originally Posted by Dustmaker65

While searching the "old" posts about replacement panels, I found Woodall Industries. Could not find alot about them though...

So anyone have any experience with their products? Doors, Fenders, Hoods, Patch panels...

They generally have nice parts but it is almost always a crap shoot. I know Southern Kentucky Classics and Classic Chevy Parts carries some of their stuff. If you type "woodall parts" into the Google box at the top of this page, click on the circle in front of "67-72chevytrucks.com" and click on the Google button you will find quite a few posts on the subject. Including yours...

LockDoc

[BossHogg69]

I pretty much only order from Southern Kentucky Classics and Classic Chevy Parts. I haven't had any major issues with any of the Woodall Parts I've gotten from them. Some of their stuff is Tri-plus, some Woodall. All of it will take a few swear words, some persuading, probably a hammer and most likely a grinder to fit right. I ended up using inner & outer rockers (both sides), kick panels (both sides), two cab corners, door hinge pockets, door striker plates, and a few other things. You can look at the pics in my profile to see how it all came out.

I've pretty much always had good luck with SoKy and Classic.

[Dustmaker65]

Originally Posted by LockDoc

If you type "woodall parts" into the Google box at the top of this page, click on the circle in front of "67-72chevytrucks.com" and click on the Google button you will find quite a few posts on the subject. Including yours...

LockDoc

Been there, and did that... Most of those posts are 5 yrs old or older.

My thinking is, If no one has used them or commented on them in 5 yrs, they are probably junk...

[Dustmaker65]

Originally Posted by BossHogg69

I pretty much only order from Southern Kentucky Classics and Classic Chevy Parts. I haven't had any major issues with any of the Woodall Parts I've gotten from them. Some of their stuff is Tri-plus, some Woodall. All of it will take a few swear words, some persuading, probably a hammer and most likely a grinder to fit right. I ended up using inner & outer rockers (both sides), kick panels (both sides), two cab corners, door hinge pockets, door striker plates, and a few other things. You can look at the pics in my profile to see how it all came out.

I've pretty much always had good luck with SoKy and Classic.

That's great! I am hoping I can pick up everything from them to save on shipping!

[Fldawg]

bought a complete bed quality sheet metal, unless they have changed the bed floor is the best quality floor i've seen

[71meangreenc10]

I picked up a LWB bed floor from Southern Kentucky Classics and it was Woodall. Got it late 2012 if I remember and it was spot on. Solid quality piece and everything lined up. Got the scratch and dent sale, saved over half the price and only took five minutes with a hammer and dolly to straighten out the dent. Well worth it.

Smitty