|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-15-2015, 11:52 PM
|
#1 |
|
Registered User
Join Date: Apr 2015
Location: Calvert City
Posts: 53
|
67 Truck ignition switch
So I have a 67 truck. The ignition switch is just layed over the column. I see that 67 was single year only for the switch. The switch in this truck has the acc position. So my question is, I need the spacer deal and the nut so I can install it correctly. What year truck do I order the parts for? Thanks again!
|
|
|
|
04-16-2015, 12:02 AM
|
#2 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
|
Re: 67 Truck ignition switch
-
The spacer for the '67 is a one year only item and is not reproduced. You will have to find a used one. The screw on chrome bezel is reproduced and any parts vendor should have it.... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
04-16-2015, 12:05 AM
|
#3 |
|
Registered User
Join Date: Apr 2015
Location: Calvert City
Posts: 53
|
Re: 67 Truck ignition switch
So it's specific to the truck? The fact that it's not a 67 switch doesn't matter right?
|
|
|
|
|
04-16-2015, 02:04 AM
|
#4 |
|
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: 67 Truck ignition switch
Yes its spicific to the 67, you can install an after market switch with some creative (cough) wiring
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
|
|
|
04-16-2015, 07:54 AM
|
#5 |
|
Registered User
Join Date: Apr 2015
Location: Calvert City
Posts: 53
|
Re: 67 Truck ignition switch
The wiring doesn't scare me at all, it's what I do. I just need some guidance on what switch will fit the hole. I was hoping the spacer was specific to the 67 switch, cause like I said, this one has acc so I don't think it's original. Thanks for the help!
|
|
|
|
|
04-16-2015, 09:10 AM
|
#6 | |
|
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
|
Re: 67 Truck ignition switch
Quote:
LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
|
04-16-2015, 09:46 AM
|
#7 |
|
Registered User
Join Date: Apr 2015
Location: Calvert City
Posts: 53
|
Re: 67 Truck ignition switch
Gotcha. I'll find a spacer and bezel. Thanks for the help
|
|
|
|
|
04-19-2015, 05:50 PM
|
#8 |
|
Registered User
Join Date: Apr 2015
Location: Calvert City
Posts: 53
|
Re: 67 Truck ignition switch
OK so I know I'm beating a dead horse here, and I'm sure its just because I can't see what it is I'm missing. Can I buy an ignition switch, spacer and bezel for a 69 and put in the truck? Is it because of the hole in the dash or what is it that keeps it from working correctly? Thaks again guys.
|
|
|
|
|
04-19-2015, 07:28 PM
|
#9 | |
|
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
|
Re: 67 Truck ignition switch
Quote:
Yes, it is because of the hole in the dash. The '67 has the small hole and the '68-'72 have the large hole.... If you enlarge the hole be sure and retain the notches and tabs around the edge of the hole to locate the correct orientation of the switch and to keep the whole assembly from turning when you turn the key... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 04-19-2015 at 07:39 PM. |
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
