The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-31-2015, 11:46 PM   #1
SierraMtns
Registered User
 
SierraMtns's Avatar
 
Join Date: Jun 2014
Location: Shingle Springs, CA
Posts: 869
Rearend Alignment

My rear end is off a little after installing 6" Hotckis springs. I have a ECE track bar. Its off about 3/8". Would you guys recommend adjusting it or just drive it down to alignment shop?


Driver side.




Passenger side.




Thanks
SierraMtns is offline   Reply With Quote
Old 06-01-2015, 12:53 AM   #2
Ruscal
Registered User
 
Join Date: Jun 2013
Location: Carlsbad, California
Posts: 165
Re: Rearend Alignment

If your track bar is adjustable, just go for it. Make sure your truck is weighted at ride height, and then measure just like you did before.
Russ
Ruscal is offline   Reply With Quote
Old 06-01-2015, 01:26 AM   #3
Sklptrljay
Registered User
 
Sklptrljay's Avatar
 
Join Date: Apr 2012
Location: Stillwater, Oklahoma
Posts: 874
Re: Rearend Alignment



That is what an adjustable bar is for. I used a come along to pull mine into the right position, put the threads where I needed them, and popped it into place. Easy-peasy.
__________________
1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list.

1972 GMC 4X4 K1500 Survivor - Sold

No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy
Sklptrljay is offline   Reply With Quote
Old 06-01-2015, 07:25 AM   #4
hamjet
Registered User
 
hamjet's Avatar
 
Join Date: Apr 2013
Location: South Westerlo, New York
Posts: 1,325
Re: Rearend Alignment

LOL, when I read the title it reminded me of when I was young. the rear tires were always bald from burning out and dad wanted to know why. I said the rear end needed alignment...
__________________
Thanks, Joe..
1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB.
hamjet is offline   Reply With Quote
Old 06-01-2015, 08:31 AM   #5
engineer_gregh
Registered User
 
engineer_gregh's Avatar
 
Join Date: Feb 2012
Location: Smyrna TN
Posts: 1,153
Re: Rearend Alignment

I would make sure your bed is on straight. Measure the gap between the cab and the bed on the left and right corners to make sure the gap is the same. My bed was cocked causing my measurements to be off.
__________________
1971 Longbed BB Cheyenne Super
1972 Longbed SB Cheyenne Super
1972 Longbed Highlander Custom Deluxe
1975 K5 4x4 full convertible

Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=645165

Greg Smyrna TN
engineer_gregh is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com