WI Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Grille - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**60-66** · 06-04-2015, 02:52 PM

Getting down to the last of the trim pieces , saved best for last. First "Ill take it " Gets it. Paypal , Money order checks. MUST Reply here to wants.

One Pair 67-68 Aluminum Grille hoops NOS 3884182 In boxes SOLD !Shipped

One PAIR 67 68 NOS 3884719 3884720 Aluminum Headlight bezels SOLD Shipped.

TWO 3990301 shift levers Fits 1971 and 1972 ALL Except tilt. NOS SOLD EA shipped.

One Pair of Drivers side inner and outer door glass seals 3893781+3893783 NOS 150.00 pair. one extra 3893781 this one is $65.00

One pair NOS 1967-1972 FLEETSIDE and Blazer upper tailgate mouldings 3897688 and 3897687 Same as 3917742 3917741 $160.00 Shipped.

One Pair 1967 1968 Front fender eyebrows. 3933856 3933855 SOLD Shipped.

One pair 1967 1968 REAR taillight trim 3917743 3917744 $150.00 shipped.

SOLD $165.00 shipped.

One ALMOST complete set of 1967 1968 Side mouldings, only missing one Right Front wheel molding and one RH cab short molding. The bed moldings are for a long bed but can be shortened since they are straight for a short bed. SOLD shipped.

**Rods** · 06-04-2015, 04:30 PM

If you will take $1800 for the grille hoops,headlight basils,tailgate moldings, fender eyebrows,rear tailgate trim,sill moldings and your almost complete set shipped 85032 I'll take them

**60-66** · 06-04-2015, 05:02 PM

If I have this right , that all comes to $2110.00 . . I will split the difference at $1960.00 shipped. Thank you for the offer !

**Rods** · 06-04-2015, 05:53 PM

I will do that I will send you a pm

**Rods** · 06-04-2015, 07:45 PM

Send me your pay pal info

timmoser · 06-04-2015, 10:26 PM

are those window felts (wipers) is it a set of 4 ? how much ?

**60-66** · 06-04-2015, 11:07 PM

Quote:

Originally Posted by timmoser

are those window felts (wipers) is it a set of 4 ? how much ?

That's these, One Pair of Drivers side inner and outer door glass seals 3893781+3893783 NOS 150.00 pair. one extra 3893781 this one is $65.00

**Cash3481** · 06-04-2015, 11:17 PM

If the shift levers have no pitting I'll take one please!

**special-K** · 06-05-2015, 06:38 AM

I don't see the tail light trim listed in that package. If those are included but overlooked in the post, so be it. If they are available I will take them

**Rods** · 06-05-2015, 09:20 AM

I've sent you several PMs but yet have not heard from you?
noticed some of the trim pieces are for sale on eBay ?
I do want the tail light trim I miss typed and put tailgate trim but as you can see in the thread the dollar amount total would include those in the package deal.

**60-66** · 06-05-2015, 09:35 AM

I just responded to all your PMs just minutes ago , only one item WAS on ebay and now I ended. Yep , understood on the trim. I have a couple extras and will respond to others later today. Thanks again, Jon

**60-66** · 06-05-2015, 09:36 AM

Quote:

Originally Posted by special-K

I don't see the tail light trim listed in that package. If those are included but overlooked in the post, so be it. If they are available I will take them

Pretty sure I have another set SpecialK , will check and post pics. Thanks,Jon

**60-66** · 06-05-2015, 09:37 AM

Quote:

Originally Posted by Cash3481

If the shift levers have no pitting I'll take one please!

No pits, NOS very nice, its yours if you want it ?

**Cash3481** · 06-05-2015, 09:56 AM

Please send me your PayPal and it's going to 67110. Thanks again!

**60-66** · 06-05-2015, 12:18 PM

Heres what I have left in, NOS 1967-1972 FLEETSIDE and Blazer upper tailgate molding's 3897688 and 3897687 Same as 3917742 3917741 $160.00 Shipped
One pair and 2 extra 3897688 , these two extras Rights are $65.00 each shipped OR 115.00 for both shipped . The one 3897687 molding has the factory rubber coating still on it, the others were in paper sleeves from GMC dealers.

**60-66** · 06-05-2015, 12:23 PM

And heres what I have left in 1967 1968 REAR taillight trim 3917743 3917744 $150.00 shipped.

One Pair ( special-K gets first pick ) and three extra lefts that I will sell at $65.00 each shipped or $150.00 all three shipped.

Maddoxdb · 06-05-2015, 01:12 PM

I will get in line on a set of taillight trim if still available. Thanks, Dustin

**60-66** · 06-05-2015, 01:17 PM

Quote:

Originally Posted by Cash3481

Please send me your PayPal and it's going to 67110. Thanks again!

Payment received ! Thank you.

**60-66** · 06-05-2015, 01:20 PM

Quote:

Originally Posted by special-K

I don't see the tail light trim listed in that package. If those are included but overlooked in the post, so be it. If they are available I will take them

You have first pick of the pair that's left

Quote:

Originally Posted by Maddoxdb

I will get in line on a set of taillight trim if still available. Thanks, Dustin

Maddoxdb second in line

**Cash3481** · 06-05-2015, 01:28 PM

Payment sent for shifter handle.
Thank you,
Mike

**60-66** · 06-06-2015, 10:50 AM

Quote:

Originally Posted by Rods

If you will take $1800 for the grille hoops,headlight basils,tailgate moldings, fender eyebrows,rear tailgate trim,sill moldings and your almost complete set shipped 85032 I'll take them

This group of moldings are sold, still many items and duplicates available.

**60-66** · 06-06-2015, 10:54 AM

Quote:

Originally Posted by special-K

I don't see the tail light trim listed in that package. If those are included but overlooked in the post, so be it. If they are available I will take them

Still waiting for a reply from you Special K ?? Want them or ?

**60-66** · 06-06-2015, 10:55 AM

Quote:

Originally Posted by Cash3481

Payment sent for shifter handle.
Thank you,
Mike

Will ship Monday, Thank you.

**special-K** · 06-06-2015, 11:19 AM

Sorry, didn't see this thread earlier when I checked. Yes, I will take them. I replied to your PM, thanks!

06-04-2015, 02:52 PM	#1
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Grille Getting down to the last of the trim pieces , saved best for last. First "Ill take it " Gets it. Paypal , Money order checks. MUST Reply here to wants. One Pair 67-68 Aluminum Grille hoops NOS 3884182 In boxes SOLD !Shipped One PAIR 67 68 NOS 3884719 3884720 Aluminum Headlight bezels SOLD Shipped. TWO 3990301 shift levers Fits 1971 and 1972 ALL Except tilt. NOS SOLD EA shipped. One Pair of Drivers side inner and outer door glass seals 3893781+3893783 NOS 150.00 pair. one extra 3893781 this one is $65.00 One pair NOS 1967-1972 FLEETSIDE and Blazer upper tailgate mouldings 3897688 and 3897687 Same as 3917742 3917741 $160.00 Shipped. One Pair 1967 1968 Front fender eyebrows. 3933856 3933855 SOLD Shipped. One pair 1967 1968 REAR taillight trim 3917743 3917744 $150.00 shipped. SOLD $165.00 shipped. One ALMOST complete set of 1967 1968 Side mouldings, only missing one Right Front wheel molding and one RH cab short molding. The bed moldings are for a long bed but can be shortened since they are straight for a short bed. SOLD shipped. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK Last edited by 60-66; 06-06-2015 at 10:52 AM.

06-04-2015, 04:30 PM	#2
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,485	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri If you will take $1800 for the grille hoops,headlight basils,tailgate moldings, fender eyebrows,rear tailgate trim,sill moldings and your almost complete set shipped 85032 I'll take them

06-04-2015, 05:02 PM	#3
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri If I have this right , that all comes to $2110.00 . . I will split the difference at $1960.00 shipped. Thank you for the offer ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

06-04-2015, 05:53 PM	#4
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,485	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri I will do that I will send you a pm

06-04-2015, 07:45 PM	#5
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,485	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri Send me your pay pal info

06-04-2015, 10:26 PM	#6
timmoser Registered User Join Date: Oct 2012 Location: Elora Ontario , Canada Posts: 140	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri are those window felts (wipers) is it a set of 4 ? how much ?

06-04-2015, 11:17 PM	#8
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri If the shift levers have no pitting I'll take one please! __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

06-05-2015, 06:38 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri I don't see the tail light trim listed in that package. If those are included but overlooked in the post, so be it. If they are available I will take them __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-05-2015, 09:20 AM	#10
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,485	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri I've sent you several PMs but yet have not heard from you? noticed some of the trim pieces are for sale on eBay ? I do want the tail light trim I miss typed and put tailgate trim but as you can see in the thread the dollar amount total would include those in the package deal.

06-05-2015, 09:35 AM	#11
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri I just responded to all your PMs just minutes ago , only one item WAS on ebay and now I ended. Yep , understood on the trim. I have a couple extras and will respond to others later today. Thanks again, Jon __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

06-05-2015, 09:56 AM	#14
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri Please send me your PayPal and it's going to 67110. Thanks again! __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

06-05-2015, 12:18 PM	#15
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri Heres what I have left in, NOS 1967-1972 FLEETSIDE and Blazer upper tailgate molding's 3897688 and 3897687 Same as 3917742 3917741 $160.00 Shipped One pair and 2 extra 3897688 , these two extras Rights are $65.00 each shipped OR 115.00 for both shipped . The one 3897687 molding has the factory rubber coating still on it, the others were in paper sleeves from GMC dealers. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK Last edited by 60-66; 06-05-2015 at 12:26 PM.

06-05-2015, 12:23 PM	#16
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri And heres what I have left in 1967 1968 REAR taillight trim 3917743 3917744 $150.00 shipped. One Pair ( special-K gets first pick ) and three extra lefts that I will sell at $65.00 each shipped or $150.00 all three shipped. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

06-05-2015, 01:12 PM	#17
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri I will get in line on a set of taillight trim if still available. Thanks, Dustin

06-05-2015, 01:28 PM	#20
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri Payment sent for shifter handle. Thank you, Mike __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!



Register or Log In To remove these advertisements.

06-06-2015, 11:19 AM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Nos 67-72 sill moldings headlight bezels,door glass seals 67 68 side moldings Gri Sorry, didn't see this thread earlier when I checked. Yes, I will take them. I replied to your PM, thanks! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.