C20 Panhard bar for 4" rear lower - The 1947 - Present Chevrolet & GMC Truck Message Board Network

northerngmc · 06-13-2015, 12:38 PM

For those of you that have lowered the rear of a C20 with coil springs what did you do about a panhard bar?

For a 4" rear lowering with lowered coil springs did you use a different panhard bar?

If so, where did you get it?

I am attempting to order a 2"/4" lowering springs and shocks for my 1968 C20.

cdowns · 06-13-2015, 01:56 PM

get an adjustable panhard bar so you can center the rear

northerngmc · 06-13-2015, 04:39 PM

Quote:

Originally Posted by cdowns

get an adjustable panhard bar so you can center the rear

Any idea where? C10 and C20 have different panhard bars. I can only find adjustable C10 panhard bars. I know there are numerous guys on here who have lowered a C20 on coil springs and I am looking for a proven solution.

D-rock1981 · 06-13-2015, 04:46 PM

I just cut my factory one, sleeved it, and welded to the correct length. You don't really need an "adjustable" bar. It's kind of a set it and forget it thing.

northerngmc · 06-13-2015, 06:09 PM

Quote:

Originally Posted by D-rock1981

I just cut my factory one, sleeved it, and welded to the correct length. You don't really need an "adjustable" bar. It's kind of a set it and forget it thing.

Thanks.

06-13-2015, 12:38 PM	#1
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	C20 Panhard bar for 4" rear lower For those of you that have lowered the rear of a C20 with coil springs what did you do about a panhard bar? For a 4" rear lowering with lowered coil springs did you use a different panhard bar? If so, where did you get it? I am attempting to order a 2"/4" lowering springs and shocks for my 1968 C20. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

06-13-2015, 01:56 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: C20 Panhard bar for 4" rear lower get an adjustable panhard bar so you can center the rear __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-13-2015, 04:46 PM	#4
D-rock1981 Registered User Join Date: Jun 2015 Location: Denver, co Posts: 66	Re: C20 Panhard bar for 4" rear lower I just cut my factory one, sleeved it, and welded to the correct length. You don't really need an "adjustable" bar. It's kind of a set it and forget it thing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.