Pickup Carpet In A Panel Truck

[blown240]

I am going to be putting carpet in my panel truck and was wondering how far back a truck carpet kit goes? Would it reach the step in the floor?

[1963c-10]

Mine goes to the back of the cab.

[blown240]

I assume that the back of a cab on a truck is where the small step is in a Panel. Thanks for the pics!

[1963c-10]

No problem. I can take a measurement tonight if needed.

[blown240]

I think it will be ok. Worst case is that I have a small strip under the seat that I have to cover with the same carpet that I put in the back.

Thanks again!

[The Rocknrod]

Two words - Shag Carpet.

[jonzcustomshop]

the back of a truck cab will be right where you can see the rear edge of the rear floor brace in this first pic.

also does your panel have the step on the passenger side like this suburban floor? that might be a problem too.

[chevy_mike]

I don't have a picture of the front floor but looking at this one from my panel, I don't think there is the long floor part behind the front seats, since there was never any rear seats and footwell area needed. This pic looks like the rise is right at the back door line. My guess is a truck carpet would fit well.

[1963c-10]

Looking at my cab last night and pics of panel cabs I think you'll be fine with the truck carpet.

Mine goes completely under the gas tank all the way to the back cab wall.

[blown240]

Thanks so much for taking the time to check for me! Thats one of the reasons I love this place.

Here are some pics of exactly what I have. Ideally the carpet would go right up to the little 2" step in the floor.

[1963c-10]

Not being a panel guru......I'm guessing the seats bolt in pretty much the same location as the trucks?

If that's the case, then you'll be fine with the truck carpet.

[1963c-10]

Heres another pic for reference. Shows the seat tracks & jack kit in the factory mount location.

[blown240]

Cool! Looks like truck carpet will do the trick! Thanks again for the effort to help me out!