Going back to stack axle on a 54 1/2 ton? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chip46wis · 07-15-2015, 11:11 PM

I have found a truck 54 1/2 ton that has a pacer front end currently----I understand it was a somewhat popular swap years ago.Regardless ---If I buy it I would rather go back to a stock straight axle with disk brake swap ect.
My question---what years front axle will bolt back on to the 54 frame----the pacer swap does not require frame mods and it SHOULD be a bolt on deal?

Thanks chip

chip46wis · 07-15-2015, 11:21 PM

OK OK stock front axle what years fit? looks like 47-54 then 55 up is different?

beanyard · 07-16-2015, 08:25 AM

Quote:

Originally Posted by chip46wis

OK OK stock front axle what years fit? looks like 47-54 then 55 up is different?

I believe 47-55 first have a narrower frame than 55 2nd -59 which means the spring mounts are closer together.
Posted via Mobile Device

**mr48chev** · 07-16-2015, 11:24 AM

Yep it has to be an AD front axle. If they got lazy and left the spring hangers in place at the back of the front springs it should be a simple swap with just a lot of grinding after you trim the Pacer front end off. Parts should be easy to find for the stock front end.

47 Fasttoys · 07-20-2015, 05:26 PM

Got a picture of the truck? I sold my '54 which I put a Pacer front under about 15 years ago and I wondered what ever became of it. Mine also had a tilt front end on it and mini tubs in the bed when I sold it.
Thanks Rob

chip46wis · 07-20-2015, 10:28 PM

Thanks---truck was sold before I got there---it was in Davenport Iowa area.

07-15-2015, 11:11 PM	#1
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	Going back to stack axle on a 54 1/2 ton? I have found a truck 54 1/2 ton that has a pacer front end currently----I understand it was a somewhat popular swap years ago.Regardless ---If I buy it I would rather go back to a stock straight axle with disk brake swap ect. My question---what years front axle will bolt back on to the 54 frame----the pacer swap does not require frame mods and it SHOULD be a bolt on deal? Thanks chip

07-15-2015, 11:21 PM	#2
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	Re: Going back to stock front axle on a 54 1/2 ton? OK OK stock front axle what years fit? looks like 47-54 then 55 up is different?

07-16-2015, 11:24 AM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: Going back to stack axle on a 54 1/2 ton? Yep it has to be an AD front axle. If they got lazy and left the spring hangers in place at the back of the front springs it should be a simple swap with just a lot of grinding after you trim the Pacer front end off. Parts should be easy to find for the stock front end. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

07-20-2015, 05:26 PM	#5
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Going back to stack axle on a 54 1/2 ton? Got a picture of the truck? I sold my '54 which I put a Pacer front under about 15 years ago and I wondered what ever became of it. Mine also had a tilt front end on it and mini tubs in the bed when I sold it. Thanks Rob __________________ My '47 C.O.E build

07-20-2015, 10:28 PM	#6
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	Re: Going back to stack axle on a 54 1/2 ton? Thanks---truck was sold before I got there---it was in Davenport Iowa area.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.