![]() |
![]() |
#1 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,611
|
Spring exposed
While stripping the paint off of my rear axle I wore through the rubber coating that covers the spring that goes into the rear of the drum. The spring is what the emergency brake cable passes through right before it enters the drum. It is a small Nick but the spring is exposed. Is that going to be an issue, should I not wory about it, should I replace it?
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2012
Location: Fort Campbell, KY
Posts: 494
|
Re: Spring exposed
Well it would depend on what kind of restoration you are doing, and if it's going to bother you or not. I would hit it with some paint or rubber undercoating to reseal it and forget about it.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,611
|
Re: Spring exposed
It is not going to be a show truck. I was only concerned with it maybe rusting and causing further problems.
|
![]() |
![]() |
![]() |
#4 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Spring exposed
A dab or two of liquid electrical tape would fix that.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|