Looking for all four exterior fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 09-12-2003, 12:02 AM

Hey guys, just testing the water yet agian to see if I can find some fenders to replace the four rotted / dented ones on my truck... I would prefer something fairly local (somewhere in Alberta)

I want to go with a clean trimless look, but my wheel wells are rotted out and I'm not sure if I can rebuild them... I wanna see if real fenders are cheaper than patch panels...

ElGracho · 09-12-2003, 12:53 AM

New 73-80 GM fenders are $230 list each down here. Not really that much considering how much you would pay to get a wrecking yard set stripped and take the dings out of them.

Russell · 09-12-2003, 09:38 AM

Hmm -- I was hoping to find all four for around 500 tops... I'm working on a reallly limited budget

Paulgs71 · 09-13-2003, 01:08 AM

Russell,
I might be able to get them for you if you can meet me on I-94 (Montana) $500. No more no less. No money up front but you would definitely need to be firm that you can do this?!?!

Paul71gs@msn.com

Russell · 09-13-2003, 10:19 AM

Unfortunately, that would be around a 12 hour drive at over 60 miles an hour... I am from Alberta Canada, otherwise I would definitly take you up on your offer. I would do the drive, but the vehicle I am able to drive right now is needed daily by my father.

09-12-2003, 12:02 AM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Looking for all four exterior fenders Hey guys, just testing the water yet agian to see if I can find some fenders to replace the four rotted / dented ones on my truck... I would prefer something fairly local (somewhere in Alberta) I want to go with a clean trimless look, but my wheel wells are rotted out and I'm not sure if I can rebuild them... I wanna see if real fenders are cheaper than patch panels... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-12-2003, 12:53 AM	#2
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,551	New 73-80 GM fenders are $230 list each down here. Not really that much considering how much you would pay to get a wrecking yard set stripped and take the dings out of them. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

09-12-2003, 09:38 AM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hmm -- I was hoping to find all four for around 500 tops... I'm working on a reallly limited budget __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-13-2003, 01:08 AM	#4
Paulgs71 Registered User Join Date: Apr 2003 Posts: 59	2 front fenders 2 full quarters Rustfree Russell, I might be able to get them for you if you can meet me on I-94 (Montana) $500. No more no less. No money up front but you would definitely need to be firm that you can do this?!?! Paul71gs@msn.com

09-13-2003, 10:19 AM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Unfortunately, that would be around a 12 hour drive at over 60 miles an hour... I am from Alberta Canada, otherwise I would definitly take you up on your offer. I would do the drive, but the vehicle I am able to drive right now is needed daily by my father. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.