OH Transfer case, posi rear end, front axle, skid plate, brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy Schadow · 10-21-2015, 08:36 PM

I converted my '72 4WD Blazer to 2WD and have these parts left over.

Transfer case $100

Shifter $100 (SOLD)

Transfer case cross members with skid plate $50 (SOLD)

Transfer case mount $20

Posi rear end $150 (SOLD)

4WD front axle, disc brakes, locking hubs $100

Misc. brackets, you pay shipping (Exhaust bracket only SOLD)

Drive shafts also available.

I live off the turnpike near Toledo airport.

**1rippen6** · 10-21-2015, 09:29 PM

I will take the crossmember skid plate and misc brackets if you want to ship

Chevy Schadow · 10-21-2015, 09:37 PM

Quote:

Originally Posted by 1rippen6

I will take the crossmember skid plate and misc brackets if you want to ship

I assume you want the skid plate without the cross members. Let me see how much of a pain it is to get it off. It would be best if you would drive over and take everything. Worth a shot.

bluek5 · 10-21-2015, 09:47 PM

In line for the transfer case cross members and skid plate. That is if you decide to ship.
Paul

**1rippen6** · 10-21-2015, 09:49 PM

LOL it is more than a drive over for me but if I was closer I would take everything off you hands. I would like the skid plate and crossmembers should unbolt fairly easy if you did the 2wd swap you should have no problem but if you would rather not ship the crossmembers than the skid plate will work. I actually only need the one bracket with the red circle if you want to sell it separately.

Chevy Schadow · 10-21-2015, 10:19 PM

Quote:

Originally Posted by 1rippen6

LOL it is more than a drive over for me but if I was closer I would take everything off you hands. I would like the skid plate and crossmembers should unbolt fairly easy if you did the 2wd swap you should have no problem but if you would rather not ship the crossmembers than the skid plate will work. I actually only need the one bracket with the red circle if you want to sell it separately.

I figured that would be the popular bracket.

Let me see if I can find an appropriate box for everything to fit in.

**1rippen6** · 10-21-2015, 10:34 PM

Sounds good thanks

**dutchmanz** · 10-21-2015, 11:22 PM

Would you sell just the bracket on the steering link for the steering stabilizer?

Chevy Schadow · 10-22-2015, 08:34 PM

Quote:

Originally Posted by 1rippen6

Sounds good thanks

I boxed everything up that you wanted, 55 lbs. USPS quote is $45.

Chevy Schadow · 10-22-2015, 08:35 PM

Quote:

Originally Posted by dutchmanz

Would you sell just the bracket on the steering link for the steering stabilizer?

I will probably sell just the bracket. I am going to wait a few days to see if someone wants the whole axle. I will let you know.

**1rippen6** · 10-22-2015, 08:35 PM

OK what is my total with shipping and do you use paypal

Chevy Schadow · 10-22-2015, 08:43 PM

Quote:

Originally Posted by 1rippen6

OK what is my total with shipping and do you use paypal

$50 for cross members and skid plate
$15 for exhaust bracket
$45 shipping

$110 total

Yes, I use PayPal. I believe I have bought a few things from you.

Probably will not ship out until Monday.

**1rippen6** · 10-22-2015, 08:45 PM

OK pm me your pp info and I will send the funds thanks

**1rippen6** · 10-22-2015, 09:16 PM

PP sent thanks

**dutchmanz** · 10-22-2015, 10:21 PM

Quote:

Originally Posted by Chevy Schadow

I will probably sell just the bracket. I am going to wait a few days to see if someone wants the whole axle. I will let you know.

Understood, message me when you are ready if it doesn't sell together. If the distance wasn't an issue, I'd buy the complete axle.

robs71k5 · 10-24-2015, 02:44 AM

What's the ratio on the diff ?

Chevy Schadow · 10-24-2015, 06:47 AM

I believe the ratio is 307.

robs71k5 · 10-24-2015, 12:40 PM

I don't suppose you would be interested in shipping the possi carrier to avoid over weight shipping fees ?

Chevy Schadow · 10-24-2015, 05:37 PM

Quote:

Originally Posted by robs71k5

I don't suppose you would be interested in shipping the possi carrier to avoid over weight shipping fees ?

I would probably do that. Do you want the gears?

robs71k5 · 10-24-2015, 11:34 PM

I want to make sure The gears in my blazer are 307 . My understanding was I have 308 . Might be some rounding up going on not sure

Chevy Schadow · 10-25-2015, 07:32 AM

Quote:

Originally Posted by robs71k5

I want to make sure The gears in my blazer are 307 . My understanding was I have 308 . Might be some rounding up going on not sure

It might be 308. Not sure how to tell exactly without counting the teeth on the gears.

The posi should work with any gears. They just bolt on.

**68350** · 10-25-2015, 11:12 AM

The posi needs to be the same series carrier otherwise it won't work. 3.07/3.08 is series 3. 3.73 and 4.10 is series 4

**dutchmanz** · 10-25-2015, 09:39 PM

If rob71 decides he doesn't want the posi and gears for the rear, I'd be interested in them as well.

tjsblazer · 10-25-2015, 10:02 PM

Curious. What size and lug pattern of the steel rims that the axle is stting on?

tjsblazer · 10-25-2015, 10:04 PM

Also interested in the stabilizer hardware for both ends if it js factory. Thanks.

10-21-2015, 08:36 PM	#1
Chevy Schadow Registered User Join Date: Nov 2014 Location: Whitehouse, OH Posts: 60	Transfer case, posi rear end, front axle, skid plate, brackets I converted my '72 4WD Blazer to 2WD and have these parts left over. Transfer case $100 Shifter $100 (SOLD) Transfer case cross members with skid plate $50 (SOLD) Transfer case mount $20 Posi rear end $150 (SOLD) 4WD front axle, disc brakes, locking hubs $100 Misc. brackets, you pay shipping (Exhaust bracket only SOLD) Drive shafts also available. I live off the turnpike near Toledo airport. Attached Images Last edited by Chevy Schadow; 10-28-2015 at 07:39 PM. Reason: Update

10-21-2015, 09:29 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,812	Re: Transfer case, posi rear end, front axle, skid plate, brackets I will take the crossmember skid plate and misc brackets if you want to ship

10-21-2015, 09:47 PM	#4
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: Transfer case, posi rear end, front axle, skid plate, brackets In line for the transfer case cross members and skid plate. That is if you decide to ship. Paul

10-21-2015, 09:49 PM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,812	Re: Transfer case, posi rear end, front axle, skid plate, brackets LOL it is more than a drive over for me but if I was closer I would take everything off you hands. I would like the skid plate and crossmembers should unbolt fairly easy if you did the 2wd swap you should have no problem but if you would rather not ship the crossmembers than the skid plate will work. I actually only need the one bracket with the red circle if you want to sell it separately. Attached Images

10-21-2015, 10:34 PM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,812	Re: Transfer case, posi rear end, front axle, skid plate, brackets Sounds good thanks

10-21-2015, 11:22 PM	#8
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: Transfer case, posi rear end, front axle, skid plate, brackets Would you sell just the bracket on the steering link for the steering stabilizer? __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue

10-22-2015, 08:35 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,812	Re: Transfer case, posi rear end, front axle, skid plate, brackets OK what is my total with shipping and do you use paypal

10-22-2015, 08:45 PM	#13
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,812	Re: Transfer case, posi rear end, front axle, skid plate, brackets OK pm me your pp info and I will send the funds thanks

10-22-2015, 09:16 PM	#14
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,812	Re: Transfer case, posi rear end, front axle, skid plate, brackets PP sent thanks

10-24-2015, 02:44 AM	#16
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: Transfer case, posi rear end, front axle, skid plate, brackets What's the ratio on the diff ?

10-24-2015, 06:47 AM	#17
Chevy Schadow Registered User Join Date: Nov 2014 Location: Whitehouse, OH Posts: 60	Re: Transfer case, posi rear end, front axle, skid plate, brackets I believe the ratio is 307.

10-24-2015, 12:40 PM	#18
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: Transfer case, posi rear end, front axle, skid plate, brackets I don't suppose you would be interested in shipping the possi carrier to avoid over weight shipping fees ?

10-24-2015, 11:34 PM	#20
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: Transfer case, posi rear end, front axle, skid plate, brackets I want to make sure The gears in my blazer are 307 . My understanding was I have 308 . Might be some rounding up going on not sure

10-25-2015, 11:12 AM	#22
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Transfer case, posi rear end, front axle, skid plate, brackets The posi needs to be the same series carrier otherwise it won't work. 3.07/3.08 is series 3. 3.73 and 4.10 is series 4 __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

10-25-2015, 09:39 PM	#23
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: Transfer case, posi rear end, front axle, skid plate, brackets If rob71 decides he doesn't want the posi and gears for the rear, I'd be interested in them as well. __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue



Register or Log In To remove these advertisements.

10-25-2015, 10:02 PM	#24
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Transfer case, posi rear end, front axle, skid plate, brackets Curious. What size and lug pattern of the steel rims that the axle is stting on? __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

10-25-2015, 10:04 PM	#25
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Transfer case, posi rear end, front axle, skid plate, brackets Also interested in the stabilizer hardware for both ends if it js factory. Thanks. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.