Show off your budget air bag setups.

[russellrox]

I am looking at the airlift dominator 2600 air bags with mounts for front and rear to run on my 66 swb, I don't have drop spindles in the front but would like to run air bags all around instead for a better ride and so I can set the ride height the way I want it. I wanted a raked stance, not slammed since I don't have a notch to go that low, just want a nice look about 3 inches or so lower in the rear and a bit in the front so it looks good. Will I need drop spindles to run this setup or can I run the stock spindles. Let me see what you guys have done, pics are always a bonus.

[zplightning]

Here are some pics of mine - I bought the BC Fab stage 1 kit, which is fairly basic and consists of 1/4" line, manual switches, 5 gallon tank and one compressor. It is fairly small but gets the job done and rides great. Their kit is right around the $1K mark, but I would also budget for new shocks, shock relocation kits and a deluxe trac bar from CPP. One pic is lifted up and the others are obviously dropped down.

I have 2.5" drop spindles in front and no notch in the back, so it does have a bit of rake in the rear - I'm not sure if you would have a similar stance or something a little more level without them.

[russellrox]

keep it going