73-87 Bed Mat? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 11-27-2015, 08:07 PM

I can't seem to find a bed mat for 73-87 pickup with short bed. All I get is "discontinued". Really? With probably millions of these trucks still on the road?

I did find a mat for 8 ft beds, but even if it can shortened, I'm not sure what it would take to cut 3/8" reinforced rubber.

Anybody know where I can find one for a short bed?

**TKCR** · 11-28-2015, 12:10 AM

Try the salvage yards. There are 2 trucks that I have seen with the mats still in the beds. That is, if you don't mind a used one.

KQQL IT · 11-28-2015, 01:44 AM

First thing on Google.

http://www.realtruck.com/truck-bed-m...r/R204594.html

Ahaha long bed only.

I understand a 88 up works too.

I have one of each, I could check tomorrow if my 98 short bed fits in my 73 short bed.

Kaysen · 11-28-2015, 01:58 AM

Protecta brand from truckchamp.com part number 6701. I looked for a while and found them. It's a really good quality mat that you'll be happy with, I really like mine for the thickness and fit in my 1986 swb. The tailgate mat that they offer with it isn't very good though, so I'd recommend a horse mat from tractor supply type store for that if you want a tailgate mat.

**TKCR** · 11-28-2015, 02:01 AM

http://commerce.idmi.net/ecommerce/c...D=131&PI=51597

http://members.peak.org/~robbpynes/rbr/truck.htm

**MikeB** · 11-28-2015, 12:50 PM

Quote:

Originally Posted by KQQL IT

I could check tomorrow if my 98 short bed fits in my 73 short bed.

Thanks. Let me know.

***TKCR -- I'll call those companies on Monday to make sure the short mats are actually available.

jetmech85 · 11-28-2015, 01:27 PM

Just ordered one from realtrucks for $46.74 and free shipping. No indication of out of stock item, credit card info went through. We'll see what happens.

KQQL IT · 11-28-2015, 07:33 PM

Quote:

Originally Posted by MikeB

Thanks. Let me know.

***TKCR -- I'll call those companies on Monday to make sure the short mats are actually available.

Nope, too narrow and the fender tubs are bigger on the square.
But... gave me a good excuse to get the junk out from under it and wash my truck.

**N2TRUX** · 11-28-2015, 08:12 PM

Quote:

Originally Posted by jetmech85

Just ordered one from realtrucks for $46.74 and free shipping. No indication of out of stock item, credit card info went through. We'll see what happens.

Quote:

Originally Posted by TKCR

http://commerce.idmi.net/ecommerce/c...D=131&PI=51597

http://members.peak.org/~robbpynes/rbr/truck.htm

Quote:

Originally Posted by Kaysen

Protecta brand from truckchamp.com part number 6701. I looked for a while and found them. It's a really good quality mat that you'll be happy with, I really like mine for the thickness and fit in my 1986 swb. The tailgate mat that they offer with it isn't very good though, so I'd recommend a horse mat from tractor supply type store for that if you want a tailgate mat.

Keep us posted on how these work out. I have one in my 77, and love it. I bought it many years ago and "assumed" they were still available. I want one for my 84 Sierra and cant find one that has the cut outs for dual tanks.

Please let me know if the one you have has the cut outs, and fits properly.

jetmech85 · 11-28-2015, 09:29 PM

Personally I never use the tailgate mat but plan on a spray in bed liner. The rubber mat is great for keeping things from sliding around. I'll post up a short review if and when it gets here.

Kaysen · 11-28-2015, 10:29 PM

The protecta one does have the cutouts and fits really well IMO. Here's the picture of the cutout.

Kaysen · 11-28-2015, 10:33 PM

Another from the back. If you want a rubber mat for a swb it is the one to get. I'm pretty picky and was really impressed with the fit and quality for my 86

original-71 · 11-29-2015, 08:33 PM

Where did you buy it and how long ago ?

Kaysen · 11-29-2015, 11:45 PM

Info is in post #4. Installed it 6 months ago

UKNOWME · 11-30-2015, 12:08 AM

Quote:

Originally Posted by Kaysen

Info is in post #4. Installed it 6 months ago

I couldn't find that part # on their website. By application it only shows long bed available from them now.

jetmech85 · 11-30-2015, 12:53 AM

Up date on the Realtrucks Rugged mat: I got to thinking about the cheap price they offered me and went to the Rugged web site and in fact they don't list a mat for our trucks. I then wondered if I just ordered a mat for the tailgate. Exactly what I didn't want. They have a 24/7 online customer service that I chatted with and they cancelled my order before it shipped. Always the case, too good to be true.

cadillac_al · 11-30-2015, 10:12 AM

Quote:

Originally Posted by Kaysen

Another from the back. If you want a rubber mat for a swb it is the one to get. I'm pretty picky and was really impressed with the fit and quality for my 86

That one does have a nice tight fit. It's kinda hard to see since the bed and mat are both black. Mine has a 1/4" gap all around it and that's all it takes to make it a leaf catching bed ruster.

carboncrew · 11-30-2015, 11:10 AM

Ran into this problem too. I would love to find one that fits well.

**N2TRUX** · 11-30-2015, 11:25 AM

Quote:

Originally Posted by Kaysen

The protecta one does have the cutouts and fits really well IMO. Here's the picture of the cutout.

Quote:

Originally Posted by Kaysen

Another from the back. If you want a rubber mat for a swb it is the one to get. I'm pretty picky and was really impressed with the fit and quality for my 86

Excellent information. Thanks for sharing

Quote:

Originally Posted by cadillac_al

That one does have a nice tight fit. It's kinda hard to see since the bed and mat are both black. Mine has a 1/4" gap all around it and that's all it takes to make it a leaf catching bed ruster.

A mat is not a good alternative to a good spray in liner. My 77 wont ever see that kind of use, so the mat is a great alternative.

**TKCR** · 11-30-2015, 12:45 PM

I put a carpeted bedliner in mine. But mine has a tonneau cover and it will never get used in a manner of hauling big dirty items. Got it from Gaylords.

**MikeB** · 11-30-2015, 12:59 PM

I exchanged a couple e-mails with KN Rubber/Koneta Inc, makers of the ProtectaMat. Their #6701 is no longer manufactured, but their #6642 long bed mat has scribe lines that can be cut with a sharp utility knife to fit short bed.

***Kaysen -- you lucked out!

Kaysen · 11-30-2015, 03:35 PM

I guess I did luck out! Well that sucks for you guys, maybe you'll come up with a solution.

**N2TRUX** · 11-30-2015, 03:42 PM

Quote:

Originally Posted by MikeB

I exchanged a couple e-mails with KN Rubber/Koneta Inc, makers of the ProtectaMat. Their #6701 is no longer manufactured, but their #6642 long bed mat has scribe lines that can be cut with a sharp utility knife to fit short bed.

***Kaysen -- you lucked out!

You are correct. I checked as well, and got the same results. Capt Kaos called the manufacturer and offered to buy a quantity, but was declined.

**yote1234** · 11-19-2018, 02:06 PM

i called the manufacture of protecta brand and they refered me to "LMC" . i bought one for a short bed. it came long but was market to cut down. very pleased!!

hotrod farm truck · 11-19-2018, 07:40 PM

Quote:

Originally Posted by yote1234

i called the manufacture of protecta brand and they refered me to "LMC" . i bought one for a short bed. it came long but was market to cut down. very pleased!!

How iong ago did you order from LMC. I only seen one listed for a long bed. Just wondering if it is marked to cut for a short bed.

11-27-2015, 08:07 PM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	73-87 Bed Mat? I can't seem to find a bed mat for 73-87 pickup with short bed. All I get is "discontinued". Really? With probably millions of these trucks still on the road? I did find a mat for 8 ft beds, but even if it can shortened, I'm not sure what it would take to cut 3/8" reinforced rubber. Anybody know where I can find one for a short bed? __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

11-28-2015, 12:10 AM	#2
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: 73-87 Bed Mat? Try the salvage yards. There are 2 trucks that I have seen with the mats still in the beds. That is, if you don't mind a used one.

11-28-2015, 01:44 AM	#3
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,254	Re: 73-87 Bed Mat? First thing on Google. http://www.realtruck.com/truck-bed-m...r/R204594.html Ahaha long bed only. I understand a 88 up works too. I have one of each, I could check tomorrow if my 98 short bed fits in my 73 short bed. __________________ " That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 11-28-2015 at 01:51 AM.

11-28-2015, 02:01 AM	#5
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: 73-87 Bed Mat? http://commerce.idmi.net/ecommerce/c...D=131&PI=51597 http://members.peak.org/~robbpynes/rbr/truck.htm

11-28-2015, 01:27 PM	#7
jetmech85 Registered User Join Date: Sep 2014 Location: Texas Posts: 215	Re: 73-87 Bed Mat? Just ordered one from realtrucks for $46.74 and free shipping. No indication of out of stock item, credit card info went through. We'll see what happens.

11-28-2015, 01:58 AM	#4
Kaysen Registered User Join Date: Dec 2013 Location: Marietta, OK Posts: 277	Re: 73-87 Bed Mat? Protecta brand from truckchamp.com part number 6701. I looked for a while and found them. It's a really good quality mat that you'll be happy with, I really like mine for the thickness and fit in my 1986 swb. The tailgate mat that they offer with it isn't very good though, so I'd recommend a horse mat from tractor supply type store for that if you want a tailgate mat.

11-28-2015, 09:29 PM	#10
jetmech85 Registered User Join Date: Sep 2014 Location: Texas Posts: 215	Re: 73-87 Bed Mat? Personally I never use the tailgate mat but plan on a spray in bed liner. The rubber mat is great for keeping things from sliding around. I'll post up a short review if and when it gets here.

11-28-2015, 10:29 PM	#11
Kaysen Registered User Join Date: Dec 2013 Location: Marietta, OK Posts: 277	Re: 73-87 Bed Mat? The protecta one does have the cutouts and fits really well IMO. Here's the picture of the cutout. Attached Images

11-28-2015, 10:33 PM	#12
Kaysen Registered User Join Date: Dec 2013 Location: Marietta, OK Posts: 277	Re: 73-87 Bed Mat? Another from the back. If you want a rubber mat for a swb it is the one to get. I'm pretty picky and was really impressed with the fit and quality for my 86 Attached Images

11-29-2015, 08:33 PM	#13
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: 73-87 Bed Mat? Where did you buy it and how long ago ? __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

11-29-2015, 11:45 PM	#14
Kaysen Registered User Join Date: Dec 2013 Location: Marietta, OK Posts: 277	Re: 73-87 Bed Mat? Info is in post #4. Installed it 6 months ago

11-30-2015, 12:53 AM	#16
jetmech85 Registered User Join Date: Sep 2014 Location: Texas Posts: 215	Re: 73-87 Bed Mat? Up date on the Realtrucks Rugged mat: I got to thinking about the cheap price they offered me and went to the Rugged web site and in fact they don't list a mat for our trucks. I then wondered if I just ordered a mat for the tailgate. Exactly what I didn't want. They have a 24/7 online customer service that I chatted with and they cancelled my order before it shipped. Always the case, too good to be true.

11-30-2015, 11:10 AM	#18
carboncrew Registered User Join Date: Apr 2011 Location: Arizona Posts: 446	Re: 73-87 Bed Mat? Ran into this problem too. I would love to find one that fits well. __________________ ________________ My very own build My tailgating ambulance

11-30-2015, 12:45 PM	#20
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: 73-87 Bed Mat? I put a carpeted bedliner in mine. But mine has a tonneau cover and it will never get used in a manner of hauling big dirty items. Got it from Gaylords. Attached Images

11-30-2015, 12:59 PM	#21
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: 73-87 Bed Mat? I exchanged a couple e-mails with KN Rubber/Koneta Inc, makers of the ProtectaMat. Their #6701 is no longer manufactured, but their #6642 long bed mat has scribe lines that can be cut with a sharp utility knife to fit short bed. ***Kaysen -- you lucked out! __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

11-30-2015, 03:35 PM	#22
Kaysen Registered User Join Date: Dec 2013 Location: Marietta, OK Posts: 277	Re: 73-87 Bed Mat? I guess I did luck out! Well that sucks for you guys, maybe you'll come up with a solution.

11-19-2018, 02:06 PM	#24
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	Re: 73-87 Bed Mat? i called the manufacture of protecta brand and they refered me to "LMC" . i bought one for a short bed. it came long but was market to cut down. very pleased!! __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.