Free suspension parts off my 70' SB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Truckhead · 09-20-2003, 02:53 PM

I got the 4 shocks in good shape and the left and right front brake spindle units. I will never use the parts. The parts are free, just pay the shipping.

These parts were used up to about 1 month ago as i installed a 4/6 drop kit from ECE.

70c10 · 09-20-2003, 11:36 PM

Truckhead, What all came in your 4/6 kit?. Do you have pics of it before and after by any chance?. Thanks.......Jim

Truckhead · 09-21-2003, 08:21 PM

No pics, but, from the invoice, this is what I ordered:

drop spindles disc brake conversion kit 6 lug
1.5" drop front coils 6" drop rear coils
KYB front and rear drop shocks
up rear shock mount relocater kit
super track bar kit power brake booster
upper/lower ball joints and a-arm shafts
inner and outer tie rod ends/adj sleeves
pittman arm/power steering idler arm
front end rebuild kit and front sway bar kit

Lots of stuff, but I just wanted to do it right all at once. Work is about 80% finished. Also fixed leaking steering box, thanks to info read on this board.

Paul

Truckhead · 09-21-2003, 08:23 PM

Hey, when I typed this out I left a lot of spaces between items, but I guess they don't show up that way on the board. Sorry for what might seem garbled info.

Paul

09-20-2003, 02:53 PM	#1
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	Free suspension parts off my 70' SB I got the 4 shocks in good shape and the left and right front brake spindle units. I will never use the parts. The parts are free, just pay the shipping. These parts were used up to about 1 month ago as i installed a 4/6 drop kit from ECE.

09-20-2003, 11:36 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Truckhead, What all came in your 4/6 kit?. Do you have pics of it before and after by any chance?. Thanks.......Jim __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-21-2003, 08:21 PM	#3
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	No pics, but, from the invoice, this is what I ordered: drop spindles disc brake conversion kit 6 lug 1.5" drop front coils 6" drop rear coils KYB front and rear drop shocks up rear shock mount relocater kit super track bar kit power brake booster upper/lower ball joints and a-arm shafts inner and outer tie rod ends/adj sleeves pittman arm/power steering idler arm front end rebuild kit and front sway bar kit Lots of stuff, but I just wanted to do it right all at once. Work is about 80% finished. Also fixed leaking steering box, thanks to info read on this board. Paul

09-21-2003, 08:23 PM	#4
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	Hey, when I typed this out I left a lot of spaces between items, but I guess they don't show up that way on the board. Sorry for what might seem garbled info. Paul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.