Help finding stock fuel tank sending unit for -10an fitting

[hardwaycooke]

Need more fuel for new build...dont want to put in fuel cell. Can anyone lead me to anyone who sales or can make me a sending fuel sending unit to fit my stock behind the seat tank. I need it to fit 5/8 line. thx..

[Bgrdmoose]

http://tristarrradiator.com

Had them build me a new sending unit for the 45+gallon suburban tank. They did good work.

[hardwaycooke]

Originally Posted by Bgrdmoose

http://tristarrradiator.com

Had them build me a new sending unit for the 45+gallon suburban tank. They did good work.

thx...only person thats actually helped and ot said cut off the tip and...blah blah blah..thanks again

[72c105speed]

Are you using a stock c10 tank?

[hardwaycooke]

Originally Posted by 72c105speed

Are you using a stock c10 tank?

yes

[72c105speed]

Take and cut up a stock one add bigger tubing weld on the -10

[hardwaycooke]

Originally Posted by 72c105speed

Take and cut up a stock one add bigger tubing weld on the -10

buying one now to do that...thx!!

[72c105speed]

Originally Posted by hardwaycooke

buying one now to do that...thx!!

Just remember you don't want any restrictions

[hardwaycooke]

Originally Posted by 72c105speed

Just remember you don't want any restrictions

restriction...explain please

[72c105speed]

Originally Posted by hardwaycooke

restriction...explain please

Sharp bends, and bottle necking like if there's a smaller tube somewhere it will restrict flow

[hardwaycooke]

Originally Posted by 72c105speed

Sharp bends, and bottle necking like if there's a smaller tube somewhere it will restrict flow

5/8 to pump..no restrictions

[Orange Crate]

You don't need to weld a -10 fitting on the tube end, just use one of these;

http://www.summitracing.com/parts/su...080b/overview/

I recently finished a fuel injection install and these are way easy to assemble, I even bent up my own lines. Easy button.

[hardwaycooke]

Originally Posted by Orange Crate

You don't need to weld a -10 fitting on the tube end, just use one of these;

http://www.summitracing.com/parts/su...080b/overview/

I recently finished a fuel injection install and these are way easy to assemble, I even bent up my own lines. Easy button.

thx!!