New project, tranny/transfer case question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ron · 09-21-2003, 10:53 PM

I'm building a mild trail rig. It's a 67 Scout 800, 4.3/700R4, 4:10 gears, 33" tires, 5" lift, etc. The engine/ tranny is out out of a 85 Astro. I want to use an Atlas transfer case. What do I need to attach the TC to the transmission? Thanks

1969 GMC · 09-21-2003, 11:33 PM

this really isn't my place, but why are you getting rid of the IH engine and tranny? just curious.

leadfoot067 · 09-22-2003, 01:55 AM

i would just go to the advanced adapters site..they will have every bit of info you need....

NAPCO ken · 09-22-2003, 01:08 PM

Instead of Advance Adapters, try Novak Adapters...cheaper and better quality. I believe Novak moved to Utah, so you'll have to do a web search to find them. Good luck.

Ron · 09-22-2003, 05:36 PM

Found out I need to go with a long tailshaft. The part # for the adapter is 50-9102 (I think). I know some of you have converted to the Atlas, any comments? I'll be going with the 3.8 model. I have a 100 inch wheel base, I'm still conserned with length. Don't want any surprises. Thanks

09-21-2003, 10:53 PM	#1
Ron Registered User Join Date: Feb 2000 Location: Zillah Wa. USA Posts: 394	New project, tranny/transfer case question. I'm building a mild trail rig. It's a 67 Scout 800, 4.3/700R4, 4:10 gears, 33" tires, 5" lift, etc. The engine/ tranny is out out of a 85 Astro. I want to use an Atlas transfer case. What do I need to attach the TC to the transmission? Thanks __________________ '69 SWB '76 International "Terra" "Hooked on holiday beer"

09-21-2003, 11:33 PM	#2
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	this really isn't my place, but why are you getting rid of the IH engine and tranny? just curious. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

09-22-2003, 01:55 AM	#3
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	i would just go to the advanced adapters site..they will have every bit of info you need.... __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH

09-22-2003, 01:08 PM	#4
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	Instead of Advance Adapters, try Novak Adapters...cheaper and better quality. I believe Novak moved to Utah, so you'll have to do a web search to find them. Good luck. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

09-22-2003, 05:36 PM	#5
Ron Registered User Join Date: Feb 2000 Location: Zillah Wa. USA Posts: 394	Atlas transfer case Found out I need to go with a long tailshaft. The part # for the adapter is 50-9102 (I think). I know some of you have converted to the Atlas, any comments? I'll be going with the 3.8 model. I have a 100 inch wheel base, I'm still conserned with length. Don't want any surprises. Thanks __________________ '69 SWB '76 International "Terra" "Hooked on holiday beer"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.