TN Complete custom interior kits

[Grumpy old man]

I'm building some complete interior kits

Bench seat covers / L&R door panels / double french seamed dash cover / recover your visors , $350.00 - $400.00 depending on design in vinyl .

Suede / real leather / embroidery adds to cost .

Pictures ---- http://67-72chevytrucks.com/vboard/s...d.php?t=700777

[74baggedbug]

Dang good price

[budnikguy]

Interested

[Tumbleweed1C4]

Grumpy, do you have a source for a material to do a sandalwood dash pad? They are not available, I am guessing the parchment interior community would come running. I would be interested in that.

[Grumpy old man]

Originally Posted by Tumbleweed1C4

Grumpy, do you have a source for a material to do a sandalwood dash pad? They are not available, I am guessing the parchment interior community would come running. I would be interested in that.

Sure , That shouldn't be a problem I'll check on materials tomorrow and get back with you .

http://www.albrightssupply.com/Hampt...-p/hpt6246.htm sandalwood sample

[transfromer58]

what would the cost be minus the door panels (bench seat, dash and visors) in black?

[DA68]

I'm interested in the pricing of just a custom bench seat cover. A price range is fine, not knowing the vinyl. Thanks.

[Tumbleweed1C4]

I didn't even notice you replied with the link of the sandalwood sample. Looks right. Do you have a picture of the French seam pad? And does it need to be done on the dash pad or would you do the cover and just send that to be installed by me on my pad? Cost either way?

[Grumpy old man]

Originally Posted by transfromer58

what would the cost be minus the door panels (bench seat, dash and visors) in black?

PM sent

[Grumpy old man]

Originally Posted by Tumbleweed1C4

I didn't even notice you replied with the link of the sandalwood sample. Looks right. Do you have a picture of the French seam pad? And does it need to be done on the dash pad or would you do the cover and just send that to be installed by me on my pad? Cost either way?

I can make the dash cover and ship it to you for you to install on your dash pad , There's a couple pictures and more info here http://67-72chevytrucks.com/vboard/s...d.php?t=700777

I would rather make a few of the sandalwood at the same time because of the amount of material needed length wise would cost more for me to order and ship than what I would charge to make just 1 . I'm sure you understand or I could just raise the price to cover all the material costs

No, really the dash pad is longer than the material is wide so I have to buy the length needed going up the roll which leaves 2/3 as leftover and it would cost me to build you a dash cover ...Thats not good . PM sent

[Grumpy old man]

Originally Posted by DA68

I'm interested in the pricing of just a custom bench seat cover. A price range is fine, not knowing the vinyl. Thanks.

PM sent

[Tumbleweed1C4]

Originally Posted by Grumpy old man

I can make the dash cover and ship it to you for you to install on your dash pad , There's a couple pictures and more info here http://67-72chevytrucks.com/vboard/s...d.php?t=700777

I would rather make a few of the sandalwood at the same time because of the amount of material needed length wise would cost more for me to order and ship than what I would charge to make just 1 . I'm sure you understand or I could just raise the price to cover all the material costs

No, really the dash pad is longer than the material is wide so I have to buy the length needed going up the roll which leaves 2/3 as leftover and it would cost me to build you a dash cover ...Thats not good . PM sent

Yes I understand completely, I noticed that when I went and looked at the materiel sample page. I see the pics in the other thread, they look great. I did not receive a PM, but would be interested in a sandalwood pad with white stitching. Let me know. Thanks!

[72kool]

Here are the pictures I pm'd you about

[Rod Run]

I will probably be taking you up on door panels and dash cover at some point in the near future

[Ta12sec]

I sent you a message a while ago but never heard back, I'm interested in a set of door panels, dash cover, visors, and if you have patterns seat covers for trailblazer seats...

[Grumpy old man]

Originally Posted by Ta12sec

I sent you a message a while ago but never heard back, I'm interested in a set of door panels, dash cover, visors, and if you have patterns seat covers for trailblazer seats...

Pm Sent

[Tumbleweed1C4]

Just a reminder grumpy, I don't know if you caught it in my post but I didn't get your pm about the sandalwood dash pad.

[Grumpy old man]

Originally Posted by Tumbleweed1C4

Just a reminder grumpy, I don't know if you caught it in my post but I didn't get your pm about the sandalwood dash pad.

PM sent

[Grumpy old man]

Rebuilding spring seat foam .

http://67-72chevytrucks.com/vboard/s...d.php?t=701138

[w314speed]

Grumpy- Would you be able to do my dash pad (black NOS) in 1972-631 Olive Custom in leather french seam? Also, could you do the visors in leather? And way out in the field! Could you do a headliner in leather? Thanks, Dan

[michael bustamante]

grump. ae you selling the seat covers seperatly? i have my 67 bench and its in good shape but id like to reinforce the foam on the driver seat and get a grey vinyl and velour(?) silver cover done. with a bowtie in the middle backrest

[Grumpy old man]

Originally Posted by w314speed

Grumpy- Would you be able to do my dash pad (black NOS) in 1972-631 Olive Custom in leather french seam? Also, could you do the visors in leather? And way out in the field! Could you do a headliner in leather? Thanks, Dan

Yes on the dash , yes on the visors and yes on the headliner .Are you wanting "real cow hide leather" ?? Because there are so many "leather like" materials available today that it's a lot less upkeep that real leather that needs to be treated monthly to keep it pliable and moisturized , Not to mention the cost of real leather can get pricey fast .

[Grumpy old man]

Originally Posted by michael bustamante

grump. ae you selling the seat covers seperatly? i have my 67 bench and its in good shape but id like to reinforce the foam on the driver seat and get a grey vinyl and velour(?) silver cover done. with a bowtie in the middle backrest

Sure , If someone just wants a dash cover I'll get it sewn up for them Whatever you need . And when anyone wants a bowtie or something similar ,I always suggest having the design Embroidered onto the seat rather than it being sewn onto the seat which to me looks less finished .here is a link to one of my suppliers look thru an find the colors you want .I have an embroidery shop I work with to have pretty much anything you may want embroidered into your new covers , They even have chrome looking thread.

http://www.albrightssupply.com/

http://67-72chevytrucks.com/vboard/s...d.php?t=701138

[w314speed]

Originally Posted by Grumpy old man

Yes on the dash , yes on the visors and yes on the headliner .Are you wanting "real cow hide leather" ?? Because there are so many "leather like" materials available today that it's a lot less upkeep that real leather that needs to be treated monthly to keep it pliable and moisturized , Not to mention the cost of real leather can get pricey fast .

I'm open to suggestions and ideas on the materials! I would like minimum up keep, but I may have a source for the leather, but some are harder to work with than others.

Would you PM me a ballpark on the cost in leather for each item.

Are you around Cookesville in east TN? Thanks, Dan

[Grumpy old man]

Originally Posted by w314speed

I'm open to suggestions and ideas on the materials! I would like minimum up keep, but I may have a source for the leather, but some are harder to work with than others.

Would you PM me a ballpark on the cost in leather for each item.

Are you around Cookesville in east TN? Thanks, Dan

I'll get some prices for you on real leather and check the availability on your color and get back to you tomorrow .