![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
hillbilly
Join Date: Apr 2007
Location: hampton,tn
Posts: 459
|
65 c10 sway bar help needed
I just bought a sway bar off of a 79 c30. I bought the cpp brackets for lowered trucks. Im trying to locate the cpp brackets using txfirefighters method,but i think his thread is for a 67-72 truck. Im not sure what to go by?
__________________
-1962 C-10 |
![]() |
![]() |
![]() |
#2 |
hillbilly
Join Date: Apr 2007
Location: hampton,tn
Posts: 459
|
Re: 65 c10 sway bar help needed
Here i am holding the cpp bracket up to the frame. This is where it needs to be if i put the sway bar ends flush with the backside of the bushings on the control arms.
__________________
-1962 C-10 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2014
Location: Valparaiso, IN
Posts: 300
|
Re: 65 c10 sway bar help needed
Great Upgrade!
I started kind of back to front. I attached the ends to the A arms first and the then swung it up to the frame. After attaching the frame bushings, it was easy to mark the locations to drill the holes. I would play with it alot before drilling any holes. Good Luck! |
![]() |
![]() |
![]() |
#4 |
hillbilly
Join Date: Apr 2007
Location: hampton,tn
Posts: 459
|
Re: 65 c10 sway bar help needed
I found this in the faq but its for a ece setup.
http://www.hotrod.com/how-to/chassis...y-bar-install/ And this is the pic showing the first hole location It looks like 3" on the dot
__________________
-1962 C-10 |
![]() |
![]() |
![]() |
#5 | |
hillbilly
Join Date: Apr 2007
Location: hampton,tn
Posts: 459
|
Re: 65 c10 sway bar help needed
Quote:
__________________
-1962 C-10 |
|
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Mar 2009
Location: CA
Posts: 813
|
Re: 65 c10 sway bar help needed
Quote:
|
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2014
Location: Valparaiso, IN
Posts: 300
|
Re: 65 c10 sway bar help needed
It's been a few years but I remember about 1/2" to 1".
I do recall that the first time I tried I put jack stands under the frame and the wheels hung free. I could not get the sway bar any where close. The second attempt, I drove up on a set of rams and it nearly bolted itself on. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|