Backspacing on an 18" wheel

[44boggers]

Hi guys,

I am sure this has been discussed many times and I did do a lot of searching on the board, but couldnt really find a clear answer.

I am looking into a getting a new set of wheels. i want to run an 18" wheel.

I have a 2.5 spindle, 2 inch spring drop in the front and shackle drop in the rear ( I will probably have to remove a spring or two to get the stance right).

I dont have the body on the frame right now, so I cannot take measurements.

But I would like to have the tires tucked up close as possible to the fenders without rubbing.

Can you guys give me some recommendations on wheel sizes and back spacing please.

I live in Austria so I cant order wheels, mount them to see how the fit, and then return them if its not right. I kind of need to get it right the first time as shipping and tax kills me.

I have read some specs, such as a 18"x10" 5" backspacing for the rear.
and 18"x9.5" 5.25" backspacing for the front. Does any of that sound right?

I should add, I am looking to get the Vintage Wheels 427 wheel. They offer a 18x9.5" and 18"x11"

Any help would be greatly appreciated.

Thanks

Paul

[geezer#99]

Measure yourself to be sure.
http://www.hotrod.com/how-to/wheels-...heels-fitment/

You can also buy a ready made tool to check it out.
http://www.summitracing.com/int/part...1201/overview/

[44boggers]

Originally Posted by geezer#99

Measure yourself to be sure.
http://www.hotrod.com/how-to/wheels-...heels-fitment/

You can also buy a ready made tool to check it out.
http://www.summitracing.com/int/part...1201/overview/

Thanks, the only issue is that the body is not on the frame and wont be for another few months. I guess I could always wait, but who wants to do that.

I was just wondering if maybe there is a standard people know of with wheel size and backspacing and drop.

The wheels I am looking at are offered in 18x9.5 and 18x11 and basically any backspacing I need.

Thanks

Paul

[Scott76]

I'm running 18x9.5" with 285/40/18 all the way around, same drop as you. The front is tiiiiiight.... I havent driven it yet but I suspect some fender rolling is going to be in order.

[44boggers]

Originally Posted by Scott76

I'm running 18x9.5" with 285/40/18 all the way around, same drop as you. The front is tiiiiiight.... I havent driven it yet but I suspect some fender rolling is going to be in order.

And what back spacing are you running?

Thanks

Paul

[Scott76]

Sorry, that would probably be helpful lol.

5.25"