![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2002
Location: St. James, MO
Posts: 1,239
|
'69 K10 PS lines
Last week, I was driving home from work when one of my PS lines blew. I finally had time to investigate today, and found a hole in the steel part of what I assume is the low-pressure, return hose--I assume so because the rubber is clamped onto the steel on both ends rather than having the formed connections on the other hose. Rubber is in good shape, so I just need to replace the steel end.
What's a good source for something like this? All my searches at regular parts houses turn up generic rubber line, but it's the steel part I need.
__________________
'69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: '69 K10 PS lines
Since you just need to form a section of line and you have the fittings it shouldn't be an issue making or having a replacement made. Since its the steel line it sounds like a rub through of some sort. Make sure you correct that too.
If you must have a bolt on part look in the classifed section for used PS lines or post a WTB, want to buy, (after becoming a subscriber) ad of your own. Or simply pull the section in question and hit the yards for a workable match to your in hand sample.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2015
Location: Pacific Palisades CA
Posts: 98
|
Re: '69 K10 PS lines
I think we bought this from jegs for the high pressure. Fit well and seemed to be bent similar to oem. We had a different fitting put on it to work with a different power steering pump, but it bolted up to the oem gear box no problems.
http://www.jegs.com/i/Gates/465/355240/10002/-1 For the low pressure end something like this would work if it had a 90 degree bend in it. Our autozone ordered one for us. They looked up a few different model and year trucks before finding the part number http://www.jegs.com/i/Gates/465/353250/10002/-1 |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,844
|
Re: '69 K10 PS lines
Junkyard. I saw 3 of them last week at a yard near me. These were 2WD trucks, but they are may be the same as the 4WD.
Last edited by FirstOwner69; 04-24-2016 at 12:58 AM. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2002
Location: St. James, MO
Posts: 1,239
|
Re: '69 K10 PS lines
Unfortunately, none of the yards within 100 miles of me will do anything but pull these trucks straight to the crusher. But salvage is still a good idea; I'll have to some looking around further away. Having the piece made is a good idea, too. I can't do it myself because my flare tools won't do steel, but maybe a local parts house can.
Still, I appreciate all the ideas.
__________________
'69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2000
Location: Greeneville, TN
Posts: 3,095
|
Re: '69 K10 PS lines
Inline tube has them or I can get it for you, They run you around $20
__________________
atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2002
Location: St. James, MO
Posts: 1,239
|
Re: '69 K10 PS lines
Thanks for that, pickupman; I didn't see your post till after the fact.
I found the part at LMC and ordered it. It was here in just a couple days, and I put it on today. The bend was not exactly the same as the stock, but it was close, and putting it one was not real trouble. I did bugger up the clamp, so I had to replace it with one on hand. I got the system bled easily following the manual; test drive tomorrow. Additional note: GMC Paul also carries the part. Now I know.
__________________
'69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|