CA 15x8 6-Lug Steel Wheels for 1964-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NVS-C10 · 05-02-2016, 07:27 PM

I have a clean set of 15x8 factory 6-lug 3-nub steel wheels correct for 1964-72 but will fit all our 6-lug trucks.

$380/set of four picked up or plus shipping.

bhahn70 · 05-02-2016, 08:03 PM

What is the back spacing

NVS-C10 · 05-02-2016, 10:09 PM

Quote:

Originally Posted by bhahn70

what is the back spacing

3.5"

joeydurango · 05-02-2016, 10:16 PM

I could be wrong - someone correct me if so - but I think those will only fit drum brakes. 4-nub for disc, I believe. Otherwise, I'd be interested...

NVS-C10 · 05-02-2016, 10:22 PM

Quote:

Originally Posted by joeydurango

I could be wrong - someone correct me if so - but I think those will only fit drum brakes. 4-nub for disc, I believe. Otherwise, I'd be interested...

Yes these are drum style 3-nub wheels.. most people use them on the rear for a staggered offset/rear deep dish look.

NVS-C10 · 05-04-2016, 08:25 PM

TTT

Also willing to split up the set (2 and 2) for those of you that want them for rear only..
I can also have sand blasted and powder coated any color for $50/each wheel.

NVS-C10 · 05-06-2016, 07:06 PM

TTT - Revised Price!!

NVS-C10 · 05-13-2016, 02:54 PM

Ttt

**special-K** · 05-14-2016, 09:17 AM

I'm surprised no one has taken you up on these. They are what any drum brake 70-back GM truck (way back) could use or any two trucks with disc brakes running 8s on rear and 6s on front. Even if these were 4-nub they'd never need to go on the front anyway. You don't rotate big/little sets.

Huggerorangeblood · 05-14-2016, 11:27 AM

My 1972 k10 has 3 nub wheels.

67swb72klb · 05-14-2016, 11:46 AM

I have used them before on disc brake K10's before with very little grinding needed

NVS-C10 · 05-14-2016, 10:54 PM

Quote:

Originally Posted by special-K

I'm surprised no one has taken you up on these. They are what any drum brake 70-back GM truck (way back) could use or any two trucks with disc brakes running 8s on rear and 6s on front. Even if these were 4-nub they'd never need to go on the front anyway. You don't rotate big/little sets.

Tell me about it lol

**special-K** · 05-15-2016, 07:28 AM

Try relisting them for $500. That has actually worked for me before. Makes them seem more desirable I guess

. These won't last long. Too bad you don't have a 6-lug 4wd disc brake truck to fit them up to test. The Blazer people would be all over these if they knew they'd work

rdhowe2006@yahoo.com · 05-30-2016, 12:38 AM

What is 3 nub or 4 nub?

NVS-C10 · 05-30-2016, 12:46 AM

The bumps that hold on dog dish style hubcaps

rdhowe2006@yahoo.com · 05-30-2016, 01:25 PM

Thanks

**Already Gone** · 05-30-2016, 08:00 PM

subscribed

*ck5566* · 05-30-2016, 09:46 PM

Have you taken them to a Tire store and have them spun to see how true they are?

6t9camaro · 05-30-2016, 11:19 PM

How much for 2 shipped to 58271 ?

NVS-C10 · 05-31-2016, 01:00 AM

Quote:

Originally Posted by ck5566

Have you taken them to a Tire store and have them spun to see how true they are?

Yes.. I bought them from a wheel and tire store.

NVS-C10 · 05-31-2016, 01:01 AM

Quote:

Originally Posted by 6t9camaro

How much for 2 shipped to 58271 ?

I have someone that I just gave a quote for all four shipped to AZ. If he passes I'll get you a quote.

Big O · 05-31-2016, 05:22 PM

I would like to get on that list also, ship to 77357, plz.

NVS-C10 · 05-31-2016, 08:50 PM

2-wheels are sold pending payment...

NVS-C10 · 05-31-2016, 08:53 PM

Quote:

Originally Posted by 6t9camaro

How much for 2 shipped to 58271 ?

$274.22 for two shipped to 58271

NVS-C10 · 05-31-2016, 08:55 PM

Quote:

Originally Posted by Big O

I would like to get on that list also, ship to 77357, plz.

$259.56 for two shipped to 77357

05-02-2016, 07:27 PM	#1
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	15x8 6-Lug Steel Wheels for 1964-72 I have a clean set of 15x8 factory 6-lug 3-nub steel wheels correct for 1964-72 but will fit all our 6-lug trucks. $380/set of four picked up or plus shipping. Last edited by NVS-C10; 05-06-2016 at 07:07 PM.

05-02-2016, 08:03 PM	#2
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,236	Re: 15x8 6-Lug Steel Wheels for 1964-72 What is the back spacing

05-02-2016, 10:16 PM	#4
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 827	Re: 15x8 6-Lug Steel Wheels for 1964-72 I could be wrong - someone correct me if so - but I think those will only fit drum brakes. 4-nub for disc, I believe. Otherwise, I'd be interested... __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED

05-04-2016, 08:25 PM	#6
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 TTT Also willing to split up the set (2 and 2) for those of you that want them for rear only.. I can also have sand blasted and powder coated any color for $50/each wheel.

05-06-2016, 07:06 PM	#7
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 TTT - Revised Price!!

05-13-2016, 02:54 PM	#8
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 Ttt

05-14-2016, 09:17 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 15x8 6-Lug Steel Wheels for 1964-72 I'm surprised no one has taken you up on these. They are what any drum brake 70-back GM truck (way back) could use or any two trucks with disc brakes running 8s on rear and 6s on front. Even if these were 4-nub they'd never need to go on the front anyway. You don't rotate big/little sets. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-14-2016, 11:27 AM	#10
Huggerorangeblood Registered User Join Date: Apr 2011 Location: Corvallis, Or Posts: 119	Re: 15x8 6-Lug Steel Wheels for 1964-72 My 1972 k10 has 3 nub wheels.

05-14-2016, 11:46 AM	#11
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,464	Re: 15x8 6-Lug Steel Wheels for 1964-72 I have used them before on disc brake K10's before with very little grinding needed __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

05-15-2016, 07:28 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 15x8 6-Lug Steel Wheels for 1964-72 Try relisting them for $500. That has actually worked for me before. Makes them seem more desirable I guess . These won't last long. Too bad you don't have a 6-lug 4wd disc brake truck to fit them up to test. The Blazer people would be all over these if they knew they'd work __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-30-2016, 12:38 AM	#14
rdhowe2006@yahoo.com Registered User Join Date: May 2016 Location: Summit, MS. Posts: 188	Re: 15x8 6-Lug Steel Wheels for 1964-72 What is 3 nub or 4 nub?

05-30-2016, 12:46 AM	#15
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 The bumps that hold on dog dish style hubcaps

05-30-2016, 01:25 PM	#16
rdhowe2006@yahoo.com Registered User Join Date: May 2016 Location: Summit, MS. Posts: 188	Re: 15x8 6-Lug Steel Wheels for 1964-72 Thanks

05-30-2016, 08:00 PM	#17
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: 15x8 6-Lug Steel Wheels for 1964-72 subscribed __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

05-30-2016, 09:46 PM	#18
ck5566 Account Suspended Join Date: Apr 2016 Location: Rancho Mirage, Ca. Posts: 875	Re: 15x8 6-Lug Steel Wheels for 1964-72 Have you taken them to a Tire store and have them spun to see how true they are?



Register or Log In To remove these advertisements.

05-30-2016, 11:19 PM	#19
6t9camaro Registered User Join Date: Apr 2012 Location: Winnipeg, Mb Posts: 487	Re: 15x8 6-Lug Steel Wheels for 1964-72 How much for 2 shipped to 58271 ?

05-31-2016, 05:22 PM	#22
Big O Registered User Join Date: May 2006 Location: North of Houston, TX Posts: 39	Re: 15x8 6-Lug Steel Wheels for 1964-72 I would like to get on that list also, ship to 77357, plz.

05-31-2016, 08:50 PM	#23
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 2-wheels are sold pending payment...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.