![]() |
![]() |
#1 |
Registered User
Join Date: May 2016
Location: L'épiphanie canada Québec
Posts: 7
|
71 C30 diff leaking
Hi all,
I purchased a seal to change on diff because it is leaking a little. When I removed everything, there was no seal. The seal I bought wont fit in the pocket and I cannot figure out why there was no seal. There is a seal inside when I remove the plate with 5 bolts, but I saw a pic and there is not seal. Is this possible no seal on the outside? See pics Thanks in advance, Marc-Andre |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,270
|
Re: 71 C30 diff leaking
Once you remove the yoke there should be a seal there and if your don't fit you have the wrong one. Jim
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Mar 2003
Location: Colfax-California
Posts: 8,553
|
Re: 71 C30 diff leaking
What was the number on the seal. My Napa seal book shows a 25970
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2016
Location: L'épiphanie canada Québec
Posts: 7
|
Re: 71 C30 diff leaking
I got it, Had to take off the seal shield with the 5 bolts and it was behind the reflector.
All done and ok. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|