|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-20-2016, 05:47 PM
|
#1 |
|
Registered User
 Join Date: May 2016
Location: Houston, Texas
Posts: 13
|
1970 Chevy C10 shortbed
I recently began the project of restoring my fathers 1970 C10. I'm pulling the inline 6 original engine this weekend. Any ideas or suggestions will be greatly appreciated.
Posted via Mobile Device |
|
|
|
05-20-2016, 06:00 PM
|
#2 |
|
Registered User
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: 1970 Chevy C10 shortbed
First welcome to the forum from West Texas , just undo all the wires connected to the motor , trans bolts x 6 , put a jack under the trans to hold it up while you pull the motor , battery cables ,all water hoses , motor mounts , exhaust pipe . pull the radiator ,pull the hood off . disconnect the gas pedal rod. clutch rods on the driver side if it has a clutch. get your host or cherry picker and chain to the motor front and back and try and keep it fairly level , pull it to the front and up as you go . try and get a friend to help, makes it a lot easier......Good Luck ...Don
|
|
|
|
|
05-20-2016, 06:07 PM
|
#3 |
|
Registered User
Join Date: May 2016
Location: Houston, Texas
Posts: 13
|
Re: 1970 Chevy C10 shortbed
Thanks Don... Will post pics of the progress as it comes along
Posted via Mobile Device |
|
|
|
|
05-20-2016, 06:17 PM
|
#4 |
|
Registered User
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: 1970 Chevy C10 shortbed
man we love pic's , lots of pic's . keep us posted .
|
|
|
|
|
05-20-2016, 07:36 PM
|
#5 |
|
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
|
Re: 1970 Chevy C10 shortbed
Welcome ,Im in to see another one .
|
|
|
|
|
05-20-2016, 07:58 PM
|
#6 |
|
Senior Member
Join Date: Jul 2001
Location: Hyattsville, Maryland
Posts: 3,693
|
Re: 1970 Chevy C10 shortbed
Welcome to the board. What are the plans for your fathers truck?
Ray
__________________
72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White |
|
|
|
|
05-20-2016, 08:01 PM
|
#7 |
|
Registered User
Join Date: Aug 2012
Location: Midland, TX
Posts: 1,267
|
Re: 1970 Chevy C10 shortbed
Welcome to the forum! My truck started out as a six, but no longer. Check out my build thread and others and I'm sure you'll get some great ideas.
__________________
1969 RS/SS Z10 Camaro Pace coupe 1972 GMC Short Step buildhttp://67-72chevytrucks.com/vboard/s...=1#post6356218 1979 Mazda RX7 1979 Pontiac Trans Am WS6 & 1979 Pontiac Trans Am 10th Anniversary 1999 Honda Valkyrie 2006 Corvette Z06 2010 BMW 650i |
|
|
|
|
05-20-2016, 08:30 PM
|
#8 |
|
Registered User
Join Date: Oct 2015
Location: Dallas Texas
Posts: 1,382
|
Re: 1970 Chevy C10 shortbed
Welcome from another Texan. I'm in. Pics please! Good luck
|
|
|
|
|
05-20-2016, 10:20 PM
|
#9 |
|
Registered User
Join Date: Jul 2013
Location: Winnsboro Texas
Posts: 367
|
Re: 1970 Chevy C10 shortbed
Howdy from East Texas!
If your memory is anything like mine, I suggest; 1- take a ton of before and during pics. 2- make note or mark things like motor mount, hood hinge position 3- painters tape and sharpie to label EVERY wire etc. 4- small boxes or ziplock bags to separate and label EVERY bolt, bracket etc. 5- take your time! 6- if your not sure about anything, post it here. Plenty of good folks here that are more than willing to help! Good luck!
__________________
The bitterness of poor quality lingers long after the sweetness of a low price is forgotten. |
|
|
|
|
05-20-2016, 10:35 PM
|
#10 |
|
Registered User
Join Date: May 2016
Location: richmond va
Posts: 265
|
Re: 1970 Chevy C10 shortbed
And keep your hands clear of pinch zones. Man that hurts bad! Don't trust your hoist more than you should either.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
