![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Sep 2009
Location: Phoenix, AZ
Posts: 64
|
79 upper radiator mount
I went with a bigger radiator and the old upper mount won't fit. Are there any off the shelf solutions that will work for a radiator flush with the top of the cores support or do I need to fabricate something? I was hoping the LMC big block mount would work but I'm not sure.
Thanks in advance. [IMG] ![]() [IMG] ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 752
|
Re: 79 upper radiator mount
by looking at your set up it a 73-80 rad support tall rad like that use the big block shroud and upper support to finish it off.
__________________
![]() Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2009
Location: Phoenix, AZ
Posts: 64
|
Re: 79 upper radiator mount
Thanks for the advice guys... ordered the LMC #15. If I don't post again here that means it fits!
Unfortunately only available in Chrome FYI. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 752
|
Re: 79 upper radiator mount
try Classic parts , I they might still have them http://www.classicparts.com/
__________________
![]() Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|