Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-18-2016, 01:11 PM | #1 |
Registered User
Join Date: Jun 2016
Location: Little Elm, Texas
Posts: 4
|
Front end and rear end swap
I have a 69 c10 swb that I am looking to swap to a 5 lug and disk brake set up. I amean also looking to swap the rear end, they are both coil spring. I have a donor 71 that I am going to be using for parts, what all do I need from the donor to complete the swap. Any tips or advice is greatly appreciated. I'm sorry if this has been covered before but I am new to this and this is my first build. Thank you in advance for the input.
|
07-18-2016, 03:27 PM | #2 |
Registered User
Join Date: Nov 2012
Location: ravenwood, mo
Posts: 709
|
Re: Front end and rear end swap
1. Unbolt undesired parts from vehicle.
2. Unbolt desired parts from donor vehicle. 3. Bolt desired parts onto vehicle. 4. Smoky burn outs. |
07-18-2016, 08:53 PM | #3 |
Registered User
Join Date: Jun 2016
Location: Little Elm, Texas
Posts: 4
|
Re: Front end and rear end swap
Are all of the steering components and control arms direct replacement and interchangeable with each other?
|
07-18-2016, 11:23 PM | #4 |
Registered User
Join Date: Oct 2013
Location: Elkton
Posts: 693
|
Re: Front end and rear end swap
Yup its all interchangeable as in change the complete rear and id swap the complete front end with the front cross member (engine cradle ) .Makes it very easy
|
07-19-2016, 08:01 AM | #5 |
Registered User
Join Date: Jun 2016
Location: Little Elm, Texas
Posts: 4
|
Re: Front end and rear end swap
What are the opinions of the steel A-arm bushings vs the later model rubber bushings?
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|