I need help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock73 · 10-03-2003, 05:37 PM

I was just trying to remember in my head how our dash bezels go together...

If I remember right, the circuit board mounts first, then the gauges, then the black metal piece, the lens, and then the bezel right?

If so...does the dash bezel bolt to the green/blue circuit board AND the actual metal dash???

If so on that...does anyone have an unbroken curcuit board? It doesn't have to work, it just has to be a complete piece I can use to mount my new dash assembly to the dash.

I hope this makes sense...TIA!

-Jeff

79BIG10 · 10-03-2003, 06:57 PM

Yes you're right that's the correct order. The dash bezel mounts to the metal on the lower right by the radio cutout, and to teh opposite side on the driver side by the vent then the other 2 are on the stteirng column part. There are the 4 holes there but one on each side is for bezel and other for under metal plate. Why do you need a new circuit? I thought you added new gauges? It doesn't need any to mount to the dash.

bigblock73 · 10-03-2003, 07:54 PM

So ALL/EVERY screw that holds the dash bezel on bolts to the actual dash then? If so, then I do not need the circuit...I just thought that some of the screws went to the circuit board therefore I would need it only for mounting purposes.

Thanks brandon.

-Jeff

**swervin ervin** · 10-04-2003, 06:34 PM

Some of the bezel screws go in the green gauge cluster. You do need the green cluster to mount your stock bezel. All the screws on top go into the cluster.

10-03-2003, 05:37 PM	#1
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	I need help I was just trying to remember in my head how our dash bezels go together... If I remember right, the circuit board mounts first, then the gauges, then the black metal piece, the lens, and then the bezel right? If so...does the dash bezel bolt to the green/blue circuit board AND the actual metal dash??? If so on that...does anyone have an unbroken curcuit board? It doesn't have to work, it just has to be a complete piece I can use to mount my new dash assembly to the dash. I hope this makes sense...TIA! -Jeff

10-03-2003, 06:57 PM	#2
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Yes you're right that's the correct order. The dash bezel mounts to the metal on the lower right by the radio cutout, and to teh opposite side on the driver side by the vent then the other 2 are on the stteirng column part. There are the 4 holes there but one on each side is for bezel and other for under metal plate. Why do you need a new circuit? I thought you added new gauges? It doesn't need any to mount to the dash. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

10-04-2003, 06:34 PM	#4
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Some of the bezel screws go in the green gauge cluster. You do need the green cluster to mount your stock bezel. All the screws on top go into the cluster. __________________ Mike 1985 Chevy C-10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-03-2003, 07:54 PM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	So ALL/EVERY screw that holds the dash bezel on bolts to the actual dash then? If so, then I do not need the circuit...I just thought that some of the screws went to the circuit board therefore I would need it only for mounting purposes. Thanks brandon. -Jeff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.