Rez Kit for power steering conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

our64 · 10-03-2003, 07:46 PM

Just converting to power steering. I was just wondering why I can't space the box out a bit from the frame instead of using the kit. By the time I get it here in Canada its almost a $100.00. Any thoughts or ideas..Thanks

**Classic Heartbeat** · 10-03-2003, 08:38 PM

Do like I have done. Remove the steering gear, heat the frame between the bolt holes with a torch and dent it with a 3 pound fist maul. If you look in my website at the 67 Panel Project, I explain why and how to do it. WES www.ClassicHeartbeat.com

10-03-2003, 07:46 PM	#1
our64 http://public.fotki.com/street Join Date: Nov 2002 Location: Winnipeg, Canada Posts: 169	Rez Kit for power steering conversion Just converting to power steering. I was just wondering why I can't space the box out a bit from the frame instead of using the kit. By the time I get it here in Canada its almost a $100.00. Any thoughts or ideas..Thanks

10-03-2003, 08:38 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Do like I have done. Remove the steering gear, heat the frame between the bolt holes with a torch and dent it with a 3 pound fist maul. If you look in my website at the 67 Panel Project, I explain why and how to do it. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.