IA parting 58 /9 gmc truck

[wahl4m]

cant seem to find buyer for complete truck so will break it up,factory power steering w/pump column and related stuff $1600.00,complete 336 pontaic v-8 engine runs good w stick trans {water pump leaks/wobbles } $500.00,bbw w/cab cut $400.00, ship all parts on your dime!would like to sell big items first,this truck is titled and yard drivable as it is now/ pics are on craigs list /des moines iowa

[Jaik]

Do you have the wiper system available? If so is it vacuum or electric? Thank you

[6erWebb]

What shape are the doors in? Regulators/glass/latch mechanisms in good shape?

[wahl4m]

doors have bondo in them BUT window and latches work good /glass is original ,vent windows have cracks

[GMCNUT]

I will take the power steering stuff pending us checking it out to ensure its the same as on a 1/2 ton truck - seems like this truck was a "big" truck like a 2 ton or something so want to know the measurements of the column and want to see the diameter of the shaft coming off the sector and pitman arm - these may not work on a 1/2 ton installation - check these parts against your Suburban and see if they are all the same and call and let me know - 256 486 1988 Thanks, Steve

[wahl4m]

hey guys looks like the ps set -up is going SO NOW I NEED TO move the 336 factory gmc motor and trans -runs good {does need a water pump-wobbles -bearing } and have that big back window and will do the cab cut for it ! nice chassis and lots of small stuff possible ?? see the above ad for prices i will work with you this truck must go !!! it was a driver ! and titled

[jfnar]

Do you have front bumper guards?

[wahl4m]

i cant seem to post pics on here ?? try "craigs list" des moines iowa -auto parts 58 gmc truck- try later to post here -sorry

[DA68]

Would you happen to have a good grille?

[wahl4m]

its driver quality rusty in a couple spots sorry !

[DA68]

Does it have rust through or just rust spots? Any chance you can send me pics? If easier, you can send to my phone at 440-590-2036. Thanks.

[58Chev]

Whats the seat like?

[wahl4m]

let me pull the cover and ck it out ?? you know shipping to france ? aint cheap ??? or you got somebody to ship it to -container ???

[wahl4m]

Got a big back window !!! Will cut it our w/ roof or where ever ?? $300-reduced -cheap front window -driver quality 30.00 ?? Nice frame w/suspension 3/4 ton $400.00 ??

[58Chev]

If it's good how much do you want? It can go to Nj where it will meet the truck then be shipped to the UK in a container.

[wahl4m]

cant seem to get pics to post here / but you can go to craigs list -des moines iowa -under 58 gmc truck parts -there is some pics of seat !!

[58Chev]

Will you take 150 for the seat? if so I'll take it.

[wahl4m]

ill probably hold off at this time,i have some people interested locally ?? thanks mike

[58Chev]

OK I'll have it for the full price

[wahl4m]

seat has been sold ,going to france -yes france thanks guys

[58Chev]

Hey Mike I'm trying to get hold of you, can you message me back I'd like to get shipping arranged asap Seb

[wahl4m]

just send you a message a couple hrs ago / thought it was 2 late to call /not sure of time differance in france ?? anyway call me in morning or send a pm thru this and i will get out asap /in message i gave you the dimensions /needd to know if somebody to deliver it to /or get shipping price /everybody was dragging there feet on me last week ! then had to go to kc mo. thursday and friday anyway glad to get it out and on way to you !!!! thanks mike

[58Chev]

Hey Mike, it's now 7.47 in the morning here! I don't seem to have your message, can you send it via email? Anglowindows@gmail.com cheers Seb

[wahl4m]

just for everybodys info /i did get this seat off to 'seb birds " container in new jersey -the biggest part was wrapping it in cardboard -think i used 2 rolls of "gorilla tape -over some tape i thought was as good ?? anyway estimated weigh on my ups scales at 110 # -sizes was all good - FED-EX - goes mostly by weight - anyway on shipment weighed 109#- fed -ex is expensive ! but we had to have there in asap time ! could of shipped maybe fastenal or bus -alot cheaper but somebody would of had to drive and pick it up -maybe a long ways ?? anyway i really respect and admire these over seas car/truck guys .it takes a lot of dedication and want to acquire parts ! i think i have a tough time finding and getting stuff here in the usa !! anyway good luk sebastian with your build -send some pics sometime for us people to see ??

[58Chev]

Hey Mike, Thanks for everything you've done with the seat you really are a great guy! So easy to deal with...the seat arrived last thursday and they have put it with the truck ready for shipping over to the UK on the 29th September. It should be at sea for 11 days then a week unloading and clearing customs. Can't wait to get the truck now....