I need a Bed Side Panel, Who Has the Best? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DT1 · 08-08-2016, 09:39 AM

I got to sanding the old filler out of the bed side on the 72 and when I finished, there was hardly any metal left. So, now I'm looking for a complete left side panel. It looks like there are quite a few choices out there but I'd like to get a good one. This is where I need some help. Does anyone know who I can get the highest quality one?
Thanks

Gromit · 08-09-2016, 05:09 PM

Every once in a while I only get the sound of crickets when posting a question here; so this is a bump..

Maybe put a few proposed part numbers and or sellers for what you have in mind - or a couple photos. Maybe because it is easier for folks to pick the best of three?

I saw a Sherman part number 89751L and 89751R for example..

**special-K** · 08-09-2016, 05:17 PM

To the best of my knowledge, there is only one company making these. So, vendor of choice.

DT1 · 08-09-2016, 05:31 PM

Thx 4 da bmp,
I just got one from Kevin (DaBurb) Bowtie Truck Stop Inc.

SS Tim · 08-09-2016, 05:44 PM

I'd suggest trying locally for a good used bedside.

08-08-2016, 09:39 AM	#1
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	I need a Bed Side Panel, Who Has the Best? I got to sanding the old filler out of the bed side on the 72 and when I finished, there was hardly any metal left. So, now I'm looking for a complete left side panel. It looks like there are quite a few choices out there but I'd like to get a good one. This is where I need some help. Does anyone know who I can get the highest quality one? Thanks

08-09-2016, 05:09 PM	#2
Gromit Registered User Join Date: Jul 2015 Location: Central Coast, CA Posts: 501	Re: I need a Bed Side Panel, Who Has the Best? Every once in a while I only get the sound of crickets when posting a question here; so this is a bump.. Maybe put a few proposed part numbers and or sellers for what you have in mind - or a couple photos. Maybe because it is easier for folks to pick the best of three? I saw a Sherman part number 89751L and 89751R for example..

08-09-2016, 05:17 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: I need a Bed Side Panel, Who Has the Best? To the best of my knowledge, there is only one company making these. So, vendor of choice. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-09-2016, 05:31 PM	#4
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Re: I need a Bed Side Panel, Who Has the Best? Thx 4 da bmp, I just got one from Kevin (DaBurb) Bowtie Truck Stop Inc.

08-09-2016, 05:44 PM	#5
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: I need a Bed Side Panel, Who Has the Best? I'd suggest trying locally for a good used bedside. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.