Cheap buddy buckets -- HURRY ! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 08-09-2016, 06:46 AM

These are pretty low cost at $750.

http://www.ebay.com/itm/1967-1968-Ch...NXglmP&vxp=mtr

Andy4639 · 08-09-2016, 07:30 AM

Cheap enough, but local pickup!
Ships to:
Local pick-up only

TwoFiftyShifter · 08-09-2016, 07:43 AM

Does the middle seat bottom flip up to reveal storage?

**Grumpy old man** · 08-09-2016, 08:13 AM

Quote:

Originally Posted by Andy4639

Cheap enough, but local pickup!
Ships to:
Local pick-up only

For the cheapest way to ship full size seats /doors/hoods/fenders use USHIP ,Then it's a local pick up .The uship guys will use something like this as a filler on their load to help cover gas $ I used USHIP to ship a snow plow for my 4x4 gator from NW Mass to Knoxville for $100.00

**Grumpy old man** · 08-09-2016, 08:14 AM

Quote:

Originally Posted by TwoFiftyShifter

Does the middle seat bottom flip up to reveal storage?

Yes , Good place to mount your aftermarket stereo and keep the stock am in the dash .

old Chevy guy · 08-09-2016, 09:31 AM

Only problem is that there's no mounting rail with them.

**special-K** · 08-09-2016, 09:38 AM

Quote:

Originally Posted by old Chevy guy

Only problem is that there's no mounting rail with them.

What do you mean by mounting rail? These look complete and the description supports that. Are you talking about the piece that mounts to the back wall? No biggy, I see seats most seats sold w/o that. I think it's a fair price, but I can't call that cheap

**Grumpy old man** · 08-09-2016, 09:44 AM

Quote:

Originally Posted by special-K

What do you mean by mounting rail? These look complete and the description supports that. Are you talking about the piece that mounts to the back wall? No biggy, I see seats most seats sold w/o that. I think it's a fair price, but I can't call that cheap

Well ... When I keep seeing guys paying $900 - $1,000.00 for them tore up bad $750.00 is pretty cheap

old Chevy guy · 08-09-2016, 09:15 PM

I mean the part that bolts to the floor that the seats and the box bolt on too. I looked at the listing again and now I see it is there.

CastIron · 08-09-2016, 09:32 PM

I've never understood why buddy buckets are so popular. Factory bench seats look better. For that kind of money I think I'd find something a little better looking and probably more comfortable.

**special-K** · 08-09-2016, 09:51 PM

People pay $1,000 for tore up buddy buckets because they don't know any better. Doesn't mean they are worth it. I just sold a set for that much that were really nice, just had covers and foam worn out on outer edge of driver side. I supplied the buns for that and all they needed were covers of choice. They were '68s, which are more rare, and were complete with back wall brace and strap, nice black painted frame and box, with jack instructions in good shape. That is what is worth a grand. These in the listing are better than others I see go for that much, but around $800 seems abut right. You just don't see the ones in worse shape go for less. Those are the ones I wouldn't pay that much for.

Quote:

Originally Posted by CastIron

I've never understood why buddy buckets are so popular. Factory bench seats look better. For that kind of money I think I'd find something a little better looking and probably more comfortable.

Because they like them? They are factory option, which is custom that bolts directly in. That's why. They can be done to be extremely comfortable. I have some I melted into when I sat in them.

TwoFiftyShifter · 08-09-2016, 09:56 PM

Cmon factory buckets but with a middle seat? They are awesome. Would catch me paying for a set, but they kick butt for sure.

toolboxchev · 08-09-2016, 11:11 PM

What is amazing is that someone could even ask that price. I will be another 500 minimum to bring those back into a usable condition.

What some will pay. I know where there is a set waiting for me for next to nuthin!

k20bill · 08-10-2016, 03:40 PM

we all have different tastes, buddy buckets are neat cool looking and rare, guess that's why they bring the top dollar. Go to Ricks upholstery for pic's and very good covers.

08-09-2016, 06:46 AM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Cheap buddy buckets -- HURRY ! These are pretty low cost at $750. http://www.ebay.com/itm/1967-1968-Ch...NXglmP&vxp=mtr __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

08-09-2016, 07:30 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Cheap buddy buckets -- HURRY ! Cheap enough, but local pickup! Ships to: Local pick-up only __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-09-2016, 07:43 AM	#3
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: Cheap buddy buckets -- HURRY ! Does the middle seat bottom flip up to reveal storage? __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

08-09-2016, 09:31 AM	#6
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cheap buddy buckets -- HURRY ! Only problem is that there's no mounting rail with them.

08-09-2016, 09:15 PM	#9
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cheap buddy buckets -- HURRY ! I mean the part that bolts to the floor that the seats and the box bolt on too. I looked at the listing again and now I see it is there.

08-09-2016, 09:32 PM	#10
CastIron Registered User Join Date: May 2013 Location: Oregon Posts: 329	Re: Cheap buddy buckets -- HURRY ! I've never understood why buddy buckets are so popular. Factory bench seats look better. For that kind of money I think I'd find something a little better looking and probably more comfortable.

08-09-2016, 09:56 PM	#12
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: Cheap buddy buckets -- HURRY ! Cmon factory buckets but with a middle seat? They are awesome. Would catch me paying for a set, but they kick butt for sure. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

08-09-2016, 11:11 PM	#13
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Cheap buddy buckets -- HURRY ! What is amazing is that someone could even ask that price. I will be another 500 minimum to bring those back into a usable condition. What some will pay. I know where there is a set waiting for me for next to nuthin!

08-10-2016, 03:40 PM	#14
k20bill Registered User Join Date: Aug 2016 Location: Edgewood Washington Posts: 5	Re: Cheap buddy buckets -- HURRY ! we all have different tastes, buddy buckets are neat cool looking and rare, guess that's why they bring the top dollar. Go to Ricks upholstery for pic's and very good covers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.