rear window regulator rollers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grillzy · 08-10-2016, 08:08 PM

I need to replace the rear window regulator plastic rollers. Will this fit properly? http://www.dormanproducts.com/itemde...9&SEName=74430 or are these for the driver and passenger doors?
1988 Blazer power rear window

68Timber · 08-10-2016, 10:37 PM

Have you removed the regulator yet? Just curious, I haven't pulled one out of the tailgate yet but I couldn't see how to remove the rollers on the door regulators. I ended up replacing the whole unit.

grillzy · 08-11-2016, 09:03 AM

You grind them off and knock them out. spot weld or pound new ones over like a rivet.

phillipm · 08-11-2016, 01:58 PM

I used a riveting tool meant for the type of rivets you receive in the kits. We had one at work. Part # HD-39787 I know they are expensive but I'm sure there are off brand versions that would work.

Ski-me · 08-13-2016, 09:34 AM

You got me curious so I decided to look into my rear window rollers this morning. What I found was that the rear rollers are smaller than the ones in the kit. I got the 3 roller kit last night and from the pic, they are obviously too big.

grillzy · 08-13-2016, 07:18 PM

you are right. I just ordered the ones from LMC. Thanks.

08-10-2016, 08:08 PM	#1
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	rear window regulator rollers I need to replace the rear window regulator plastic rollers. Will this fit properly? http://www.dormanproducts.com/itemde...9&SEName=74430 or are these for the driver and passenger doors? 1988 Blazer power rear window

08-10-2016, 10:37 PM	#2
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: rear window regulator rollers Have you removed the regulator yet? Just curious, I haven't pulled one out of the tailgate yet but I couldn't see how to remove the rollers on the door regulators. I ended up replacing the whole unit. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

08-11-2016, 09:03 AM	#3
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	Re: rear window regulator rollers You grind them off and knock them out. spot weld or pound new ones over like a rivet.

08-11-2016, 01:58 PM	#4
phillipm Registered User Join Date: Oct 2014 Location: Scottsdale, AZ Posts: 465	Re: rear window regulator rollers I used a riveting tool meant for the type of rivets you receive in the kits. We had one at work. Part # HD-39787 I know they are expensive but I'm sure there are off brand versions that would work.

08-13-2016, 09:34 AM	#5
Ski-me Registered User Join Date: May 2012 Location: Colo Springs, CO Posts: 870	Re: rear window regulator rollers You got me curious so I decided to look into my rear window rollers this morning. What I found was that the rear rollers are smaller than the ones in the kit. I got the 3 roller kit last night and from the pic, they are obviously too big. Attached Images __________________ - Jeff 89' K5 Blazer, 2.5" lift, 35" tires 04' GMC Yukon XL, 3/4 ton, 8.1L

08-13-2016, 07:18 PM	#6
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	Re: rear window regulator rollers you are right. I just ordered the ones from LMC. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.