KS Anyone need bed patches? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hounddogs! · 08-19-2016, 01:07 PM

LWB with rusty wheel arches and iffy taillight buckets
Header panel for steel floor - 1/2" bow, not rusty
Steel floor - rust thru over several of the cross rails, dents in other places. The outside edge with the hole pattern and bent profile is no longer on this piece.

Since I need to throw out a price, let's say $15 / square foot and we'll talk about shipping.
Will get pics if you want something in particular, but this will be going to scrap soon.

dfwright · 08-19-2016, 05:48 PM

I need one bed side brace - it's the metal bar that goes from the bedside in front of the wheel up to the frame. Would you happen to have one, and If so, how much shipped?

Item 7 in the attached LCM catalog snippet is what I am looking for, but I only need one, not a pair.

Thanks!

**dozerbill72** · 08-19-2016, 06:03 PM

I also need a bedside brace.

hounddogs! · 08-19-2016, 07:39 PM

Sorry x2, the braces are back on the rebuilt bed and not available.

bean · 08-19-2016, 11:26 PM

I need a small piece of inner bedside metal to cover where the po had an rev plug... Any help?

hounddogs! · 08-20-2016, 11:04 AM

Quote:

Originally Posted by bean

I need a small piece of inner bedside metal to cover where the po had an rev plug... Any help?

Do you have a pic of where you're needing?

oldvolkz · 08-23-2016, 02:41 AM

i need some patches. I will post pictures of what I need tomorrow.

rsgt · 08-23-2016, 08:27 AM

Would you happen to have this much of the right side?

hounddogs! · 08-23-2016, 08:33 AM

Quote:

Originally Posted by rsgt

Would you happen to have this much of the right side?

Believe so. I'll post pics this afternoon.

hounddogs! · 08-23-2016, 02:15 PM

Outer skin is solid, you can see that the inner is bad up into the wheel arch.

rsgt · 08-23-2016, 04:36 PM

I think that will work if you can cut it above the body line. Let me know how much. I live in northwest AR 72745

hounddogs! · 08-23-2016, 08:24 PM

pic for rsgt

dart_451 · 08-28-2016, 01:53 AM

i need a piece of floor bed that goes between wheel wells. loren

hounddogs! · 08-28-2016, 10:05 AM

The remnants went to scrap yesterday. Thanks for checking in. Loren.

**70STOVEBOLT** · 08-28-2016, 04:41 PM

Quote:

Originally Posted by dart_451

i need a piece of floor bed that goes between wheel wells. loren

How big of a piece do you need Loren? I have a bed I will be cutting up as well

dart_451 · 08-28-2016, 11:32 PM

i need a piece thats between the will tubs from front to back. thanks loren

**70STOVEBOLT** · 08-29-2016, 11:39 AM

From the front of the tubs to the back of the tubs or from the front of the bed to the back of the bed?

59Chevyand2000z28 · 08-29-2016, 08:40 PM

I need about 1 square foot of bed floor to patch some holes if anybody has a piece.

**70STOVEBOLT** · 09-01-2016, 12:58 PM

I should be able to come up with one square foot. It will have to go in a Large Flat Rate Box though, so shipping will be $19.00 so let's say $30.00 shipped.

dart_451 · 09-05-2016, 11:10 PM

front of tubs to back of tubes.. thanks

**70STOVEBOLT** · 09-06-2016, 03:09 PM

Loren, let me see what shape my bed floor is in tonight and I will get back to you. I don't know if there is any rust in that area or not.

**70STOVEBOLT** · 09-07-2016, 08:14 AM

Loren, the floor is rusted at the wheel tub flanges.

**Dave** · 09-07-2016, 12:22 PM

Not sure what you have that's good. But I need the floor sections in front of the tailgate on both sides. Just the corrogated top sections. Lmk, thx.

**70STOVEBOLT** · 09-07-2016, 12:45 PM

Dave, I think there is rust in those areas as well. I will take a look tonight. How long by how wide?

Thanks,
Mark

lchall · 09-07-2016, 04:52 PM

Do you happen to have this piece? I need it for the passenger side, pictured is the drivers.

Name: IMG_1572.jpg
Views: 80
Size: 49.9 KB

08-19-2016, 01:07 PM	#1
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 891	Anyone need bed patches? LWB with rusty wheel arches and iffy taillight buckets Header panel for steel floor - 1/2" bow, not rusty Steel floor - rust thru over several of the cross rails, dents in other places. The outside edge with the hole pattern and bent profile is no longer on this piece. Since I need to throw out a price, let's say $15 / square foot and we'll talk about shipping. Will get pics if you want something in particular, but this will be going to scrap soon. __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0 Last edited by hounddogs!; 08-19-2016 at 03:27 PM.

08-19-2016, 05:48 PM	#2
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,376	Re: Anyone need bed patches? I need one bed side brace - it's the metal bar that goes from the bedside in front of the wheel up to the frame. Would you happen to have one, and If so, how much shipped? Item 7 in the attached LCM catalog snippet is what I am looking for, but I only need one, not a pair. Thanks! Attached Images __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

08-19-2016, 06:03 PM	#3
dozerbill72 Senior Member Join Date: Oct 2015 Location: Berryville Arkansas Posts: 402	Re: Anyone need bed patches? I also need a bedside brace.

08-19-2016, 07:39 PM	#4
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 891	Re: Anyone need bed patches? Sorry x2, the braces are back on the rebuilt bed and not available. __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

08-19-2016, 11:26 PM	#5
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: Anyone need bed patches? I need a small piece of inner bedside metal to cover where the po had an rev plug... Any help?

08-23-2016, 02:41 AM	#7
oldvolkz Registered User Join Date: Sep 2008 Location: Hollister Ca Posts: 5	Re: Anyone need bed patches? i need some patches. I will post pictures of what I need tomorrow.

08-23-2016, 08:27 AM	#8
rsgt Registered User Join Date: Apr 2009 Location: Lowell AR Posts: 360	Re: Anyone need bed patches? Would you happen to have this much of the right side? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=698292

08-23-2016, 02:15 PM	#10
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 891	Re: Anyone need bed patches? Outer skin is solid, you can see that the inner is bad up into the wheel arch. Attached Images __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

08-23-2016, 04:36 PM	#11
rsgt Registered User Join Date: Apr 2009 Location: Lowell AR Posts: 360	Re: Anyone need bed patches? I think that will work if you can cut it above the body line. Let me know how much. I live in northwest AR 72745 __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=698292

08-23-2016, 08:24 PM	#12
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 891	Re: Anyone need bed patches? pic for rsgt Attached Images __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

08-28-2016, 01:53 AM	#13
dart_451 Registered User Join Date: May 2007 Location: topeka,ks Posts: 77	Re: Anyone need bed patches? i need a piece of floor bed that goes between wheel wells. loren

08-28-2016, 10:05 AM	#14
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 891	Re: Anyone need bed patches? The remnants went to scrap yesterday. Thanks for checking in. Loren. __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

08-28-2016, 11:32 PM	#16
dart_451 Registered User Join Date: May 2007 Location: topeka,ks Posts: 77	Re: Anyone need bed patches? i need a piece thats between the will tubs from front to back. thanks loren

08-29-2016, 11:39 AM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: Anyone need bed patches? From the front of the tubs to the back of the tubs or from the front of the bed to the back of the bed? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-29-2016, 08:40 PM	#18
59Chevyand2000z28 Registered User Join Date: Oct 2004 Location: Middleton, TN Posts: 20	Re: Anyone need bed patches? I need about 1 square foot of bed floor to patch some holes if anybody has a piece.



Register or Log In To remove these advertisements.

09-01-2016, 12:58 PM	#19
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: Anyone need bed patches? I should be able to come up with one square foot. It will have to go in a Large Flat Rate Box though, so shipping will be $19.00 so let's say $30.00 shipped. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-05-2016, 11:10 PM	#20
dart_451 Registered User Join Date: May 2007 Location: topeka,ks Posts: 77	Re: Anyone need bed patches? front of tubs to back of tubes.. thanks

09-06-2016, 03:09 PM	#21
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: Anyone need bed patches? Loren, let me see what shape my bed floor is in tonight and I will get back to you. I don't know if there is any rust in that area or not. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-07-2016, 08:14 AM	#22
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: Anyone need bed patches? Loren, the floor is rusted at the wheel tub flanges. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-07-2016, 12:22 PM	#23
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,402	Re: Anyone need bed patches? Not sure what you have that's good. But I need the floor sections in front of the tailgate on both sides. Just the corrogated top sections. Lmk, thx.

09-07-2016, 12:45 PM	#24
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: Anyone need bed patches? Dave, I think there is rust in those areas as well. I will take a look tonight. How long by how wide? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-07-2016, 04:52 PM	#25
lchall Registered User Join Date: Feb 2008 Location: St. Charles, MO Posts: 291	Re: Anyone need bed patches? Do you happen to have this piece? I need it for the passenger side, pictured is the drivers. __________________ 1967 Chevy SWB 1972 Chevy SWB 1972 Chevy SWB K20 4x4 1991 Ford F-150 2013 Dodge Ram 1500 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.