|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-11-2016, 10:50 AM
|
#1 |
|
Registered User
 Join Date: Jun 2015
Location: Glendale
Posts: 414
|
1949 bed to frame mounting holes
I'm going to get a mar-k bed in December but as of now I have no bed. I want to install no limit tank today with side fill and box in some areas for rear suspension mock up. I don't want to box frame in areas where the bed bolts to it. So I could use a little help now to save time later:
Can someone give me measurements so I can locate the needed holes? Thank you! |
|
|
|
10-11-2016, 11:48 AM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
|
Re: 1949 bed to frame mounting holes
The holes are there, I'm on the road and maybe someone can post a photo with the holes marked.
Or they can save this, mark the holes and repost it below. 
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
10-11-2016, 11:09 PM
|
#3 |
|
Registered User
Join Date: Jun 2015
Location: Glendale
Posts: 414
|
Re: 1949 bed to frame mounting holes
Can someone tell me if my notch for fuel filler removed a mounting hole for bed?
|
|
|
|
|
11-27-2016, 06:46 PM
|
#4 | |
|
Registered User
Join Date: Nov 2013
Location: Gothenburg, Sweden
Posts: 25
|
Re: 1949 bed to frame mounting holes
Quote:
__________________
1948/50 Chevy 3100, CSB 327/TH350, M II IFS |
|
|
|
|
|
11-27-2016, 08:43 PM
|
#5 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
|
Re: 1949 bed to frame mounting holes
Scroll down this page a bit. I think you are good as the cross sill goes across the frame where the hole to the right of the neck and notch are if the photo partway down the page in this link is right. http://talk.classicparts.com/threads...ed-wood.12180/
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
