The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-12-2016, 08:16 PM   #1
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
4L60E Tech

Member Low Elco wanted too know whats involved in turning a 4wd 4L60E into a 2wd 4L60E. If anyone else has any requests for any 4L60E related tech.....I will answer them here.

The 4L60E is the EASIEST trans too convert from 4wd-2wd or vice versa.

PARTS.....
2wd Output Shaft W/ 40 tooth Reluctor wheel.
2wd Extension Housing.
VSS Sensor.
6 10mm-1.50 bolts about 1"/25mm long.

TOOLS....
Torx Plus 50 socket to remove the bellhousing bolts.....DO NOT try to use a standard Torx bit! A strong Impact is recommended for removal, Torque to 35 ft lbs upon assembly.
10mm socket
13mm socket
15mm socket
Pocket sized flat screwdriver
Regular size flat screwdriver
Lock Ring Pliers with a small 90 degree tip.

Get the trans in vertical position, A hole in a work bench, Or a Flexplate over a 5 gallon bucket for the output shaft to stick through.

Remove the Torx Plus bolts holding the bellhousing. Black bolts in the pic, Remove bellhousing.

clinebarger is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com