11-01-2016, 01:15 PM | #1 |
Registered User
Join Date: Apr 2013
Location: South Westerlo, New York
Posts: 1,325
|
Am I thinking right?
When I try to start my 69 pickum up, it cranks over fast and fine, but won't start. the second I release the key to run position it starts. It doesn't matter if it's hot or cold start. this is something that started acting up for a few weeks, about 90% of the time. nothing new, other than a new key set I installed about six months ago. I believe it's the ignition switch, but before getting one I want to here your opinions. Am I correct in my thinking????
__________________
Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB. |
11-01-2016, 01:22 PM | #2 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Am I thinking right?
If is still has points then the bypass circuit is open. (the bypass circuit may be open due to a bad key switch!) If it does not have a resistor in the ignition system it is probably the key switch.
|
11-01-2016, 02:31 PM | #3 |
Registered User
Join Date: Aug 2016
Location: Lake Forest, CA
Posts: 2,177
|
Re: Am I thinking right?
Confirm with a jumper to the coil from the battery +. If it starts right up, you know the circuit isn't giving the needed voltage as designed. I vote for ignition switch as well.
__________________
"Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC |
11-01-2016, 10:43 PM | #4 |
Registered User
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
|
Re: Am I thinking right?
the little wire down on the starter solenoid has probably broken at the terminal, check this first before getting another ignition switch.....i have had this happen
|
11-01-2016, 10:43 PM | #5 |
Registered User
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
|
Re: Am I thinking right?
let us know what you find out....
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|