|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-25-2016, 08:18 PM
|
#1 |
|
F’B’D guy
 
Join Date: Feb 2004
Location: Texas/Maine
Posts: 2,234
|
85 K30 dually single cab, 2 1/2 inch lift, who has done it?
Just wondering what lift you used and what type of steering correction you did?
Thanks |
|
|
|
12-25-2016, 08:38 PM
|
#2 |
|
Registered User
Join Date: Aug 2009
Location: Sunray,TX
Posts: 251
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
2.5" shouldn't require any steering correction, but to be close to perfect a 2-2.5" drop pitman arm would work great. Don't forget to add in an ORD steering box brace before you crack out the frame. These are almost a must have even for a stock 4x4.
|
|
|
|
|
12-25-2016, 09:04 PM
|
#3 |
|
F’B’D guy
Join Date: Feb 2004
Location: Texas/Maine
Posts: 2,234
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
Cool
|
|
|
|
|
12-25-2016, 11:35 PM
|
#4 |
|
Senior Member
Join Date: May 2004
Location: Binghamton, NY
Posts: 3,469
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
Cheaper and easier, get a block to go under the stock arm. And while there put new bushing and spring kit in...
__________________
2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS |
|
|
|
|
12-26-2016, 12:00 AM
|
#5 | |
|
F’B’D guy
Join Date: Feb 2004
Location: Texas/Maine
Posts: 2,234
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
Quote:
Like this, http://shop.broncograveyard.com/Dana...9DBhoC5Ufw_wcB |
|
|
|
|
|
12-26-2016, 09:32 AM
|
#6 |
|
Senior Member
Join Date: May 2004
Location: Binghamton, NY
Posts: 3,469
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
Yes. Shop around, thought I saw it somewhere cheaper....
__________________
2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS |
|
|
|
|
12-26-2016, 06:44 PM
|
#7 |
|
F’B’D guy
Join Date: Feb 2004
Location: Texas/Maine
Posts: 2,234
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
Thanks,
I'm looking at a BDS all spring 2 1/2 lift |
|
|
|
|
01-01-2017, 11:56 PM
|
#8 |
|
Registered User
Join Date: Dec 2014
Location: Northern California
Posts: 422
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
I had that block on my truck. I HATED it and took it off. It kept loosening up. I tried the drop drag link and couldn't get the steering wheel centered. I have both now sitting in storage. I went with a dropped pitman arm, and it works very well.
|
|
|
|
|
01-02-2017, 10:30 AM
|
#9 |
|
Registered User
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
The steering block is cheap but it sucks. K30s need the drop pitman arm.
Yes it says for a 4" but k30s have the larger axle tube and perch which make up a little bit.
__________________
1985 k5 396/nv4500/203/205 d60/d70 4.56 42 sx2 1991 V3500 350/4l80/205 60/14 4.10 35 toyos. |
|
|
|
|
01-02-2017, 01:13 PM
|
#10 | |
|
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
Quote:
x2 on drop drag link or spacer block CRAP . go drop pitman arm . I have one on a k30 with 3" and it still has a slight down angle and if I had 2.5" it would still be just fine. bds is top shelf for leaf spring trucks of our style . tuff country #2 . . . skip rough country unless you want the ride of a empty dump truck . check the bds kit for 56" rear springs NOT 52" rear . k30 needs the 56" also splurge on bilstein shocks . tons of guys going with them on our leaf spring trucks these days and loving them .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
|
|
|
|
|
01-02-2017, 06:24 PM
|
#11 |
|
Registered User
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
 This is 4" on my k30. 2.5 is even better probably
__________________
1985 k5 396/nv4500/203/205 d60/d70 4.56 42 sx2 1991 V3500 350/4l80/205 60/14 4.10 35 toyos. |
|
|
|
|
01-04-2017, 08:51 PM
|
#12 |
|
F’B’D guy
Join Date: Feb 2004
Location: Texas/Maine
Posts: 2,234
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
Thanks again for all the info, you guys are top notch!
|
|
|
|
|
01-11-2017, 09:32 AM
|
#13 |
|
Charlie Daniels w/ a Tq Wrench
Join Date: May 2009
Location: Statesville, NC
Posts: 1,570
|
Re: 85 K30 dually single cab, 2 1/2 inch lift, who has done it?
I'm with the others, go ahead for a drop pitman arm. I have 4" Tuff Country springs up front, the rear is stock. I also have the ORD greaseable shackles and Zone OffRoad's sway bar links.
 DSC09872 by Garrett, on Flickr
__________________
ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
