GA Parting '78 c10 swb fleetside

[GAc10boy]

ALL PARTS FROM THIS TRUCK ARE SOLD

Pretty good condition '78 Swb fleetside c10 bed, chassis and motor only. This week only - $350 for swb chassis, bed, motor.

The bedsides are very straight with a small amount of rust bubbling up behind wheel wells (typical for these trucks). Slight crease in from of wheel well on driver's side. The bed floor has surface rust but solid. Some heavy rust near stake pocket on driver's side. I'll help you load. - $450 new price $350

305 motor dirty but complete (turns over) code dates to 1983 - $150

Have other parts listed below for extra.

Sliding rear window (pulled from cab) - $75

Driver's inner fender - No rust through - $35

Dash bezel - Great condition with no cracks - $40

Dash plaque with custom deluxe plate - $40

Gauge cluster with idiot lights - needs good cleaning with light surface rust on tins but functional - $35

Steering column - non-tilt with new lock cylinder and keys - $100 complete with driver quality (and sticky) steering wheel and guts

White painted front and rear bumpers - $50 each (both have slight tweaks but are relatively straight)

Core Support (no rust through) with headlights - $75

Filler panel below grille including running lights - $50

Hood is bent (imagine that!) and passenger fender on truck is damaged.

[burban nate]

Can you get better close ups of head light bezels. Also interested in upper and lower grill trim if not kinked.

Thanks, Nate

[GAc10boy]

Originally Posted by burban nate

Can you get better close ups of head light bezels. Also interested in upper and lower grill trim if not kinked.

Thanks, Nate

Will do first thing in the morning. I don't believe the trim is kinked but I'll confirm and provide pics. In the meantime, not sure if this picture helps.

[GAc10boy]

Originally Posted by burban nate

Can you get better close ups of head light bezels. Also interested in upper and lower grill trim if not kinked.

Thanks, Nate

Pics of the headlight bezels and the upper/lower grille trim. No kinks, dents or dings to speak of. A slight blemish on the left side of the lower trim. Could use a good cleaning/polishing. Bezels are a little damp from dew.

[burban nate]

Pm replied,

Nate

[GAc10boy]

Originally Posted by burban nate

Pm replied,

Nate

Responded.

[79 Silverado/454]

I'm interested in the sliding rear window but, I can't get the pictures to open up. Is this a factory window in nice shape or ?

[GAc10boy]

Originally Posted by 79 Silverado/454

I'm interested in the sliding rear window but, I can't get the pictures to open up. Is this a factory window in nice shape or ?

I'm sorry about the pics. Photobucket has messed up and won't let me access my photos. I'll get more up asap. To my knowledge, yes, the sliding rear window is factory. It's in good condition and looks like it's been there for a good while if not all it's life. It opens, shuts and latches like it should.

This is the best pic of it at this point. better pics.

[burban nate]

Robbie, your pm box is full.

Nate

[GAc10boy]

Originally Posted by burban nate

Robbie, your pm box is full.

Nate

Thanks! All clear now.

[TKCR]

Does it still have the ashtray insert?

[GAc10boy]

Originally Posted by TKCR

Does it still have the ashtray insert?

I believe so. Is this what you're looking for?

[TKCR]

Originally Posted by GAc10boy

I believe so. Is this what you're looking for?

That's different looking. No like this:

[GAc10boy]

Originally Posted by TKCR

That's different looking. No like this:

Don't think I have that but will double-check.

[TKCR]

Originally Posted by GAc10boy

Don't think I have that but will double-check.

It will be in the flip down on the dash, on the right, between the radio and glove box.

[GAc10boy]

Originally Posted by TKCR

It will be in the flip down on the dash, on the right, between the radio and glove box.

Thanks! I flipped down the ashtray this morning and nothing was behind it other than that big cast thing I showed you this morning. I don't think the insert survived the life of this truck.

[GAc10boy]

still parting. let me know what you need.

[GAc10boy]

Still pulling parts.

[crf250r]

Would you sell just the steering wheel? Or have any others (67-72) tucked away? Looking for a decent driver one for a 1971 flatbed better than the one that's in it.

[GAc10boy]

Originally Posted by crf250r

Would you sell just the steering wheel? Or have any others (67-72) tucked away? Looking for a decent driver one for a 1971 flatbed better than the one that's in it.

Sure. I actually have one from the 78 (with no horn button), one from a 67/68 that is in decent shape with no horn button, and one from a 69 that is in a little more rough shape and has horn button. That said, I believe they are all in better condition than the one on your truck but the 67/68 is a faded blue adn would probably look the best.

Pics of each

1969 c10 green wheel


67/68 bluish green wheel



1978 c10 black wheel

[GAc10boy]

New price on the short fleet bed and chassis

[GAc10boy]

TTT chassis and bed are still available but only thing left intact. The rear sliding window is available and assorted other parts. Let em know what you need.

[GAc10boy]

Chassis bed and motor available for $350 together this week only! Need to move this out of my driveway.

[chuckmc8]

Originally Posted by GAc10boy

Chassis bed and motor available for $350 together this week only! Need to move this out of my driveway.

Robbie, I think I can use this. Can you give me a call today? Thanks

[GAc10boy]

Originally Posted by chuckmc8

Robbie, I think I can use this. Can you give me a call today? Thanks

Thanks for chatting, Chuck. Happy we were able to strike a deal. Pending trade/sale.