72 c10 non- ac htr assy rebuild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Speedracer39** · 01-17-2017, 07:41 PM

I have one arm that is broken on my heater control assembly also The plastic cover this for the fan control window is cracked and broken I was wondering if this also comes in the rebuild kit or if it is available. Thanks

Andy4639 · 01-17-2017, 08:05 PM

You can buy the arm kit but not sure about the lens. I have never seen it offered but you never know.
I'd do a parts request on the parts board.

**Speedracer39** · 01-17-2017, 08:13 PM

Thanks, I've been doing some searching they call it a bezel mine is nasty and cracked wasn't sure if it would be more cost effective rather than rebuild just replace it.

Andy4639 · 01-17-2017, 09:43 PM

I would just replace it myself. Lot less time spent in the long run and you start with all new stuff.

01-17-2017, 07:41 PM	#1
Speedracer39 Senior Member Join Date: Sep 2016 Location: Omaha Nebraska Posts: 595	72 c10 non- ac htr assy rebuild I have one arm that is broken on my heater control assembly also The plastic cover this for the fan control window is cracked and broken I was wondering if this also comes in the rebuild kit or if it is available. Thanks

01-17-2017, 08:05 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 72 c10 non- ac htr assy rebuild You can buy the arm kit but not sure about the lens. I have never seen it offered but you never know. I'd do a parts request on the parts board. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-17-2017, 08:13 PM	#3
Speedracer39 Senior Member Join Date: Sep 2016 Location: Omaha Nebraska Posts: 595	Re: 72 c10 non- ac htr assy rebuild Thanks, I've been doing some searching they call it a bezel mine is nasty and cracked wasn't sure if it would be more cost effective rather than rebuild just replace it.

01-17-2017, 09:43 PM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 72 c10 non- ac htr assy rebuild I would just replace it myself. Lot less time spent in the long run and you start with all new stuff. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.