Porterbuilt engine mounts. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ol_skool_chevy · 01-25-2017, 01:02 AM

I have a level 3 drop member with a BBC mounts. Is there suppose to be a spacer here where my finger is between? seem like there should be one but I looked all through my bolts and parts and there were none to be had. If so I need them ASAP

contagious102 · 01-26-2017, 11:15 AM

I would just cut a piece of 1/2" pipe and insert it between there to stiffing the mount. Good to go, can't hurt any thing , has to make it stronger . I'm sure those holes are there for different mounting options.

01-25-2017, 01:02 AM	#1
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Porterbuilt engine mounts. I have a level 3 drop member with a BBC mounts. Is there suppose to be a spacer here where my finger is between? seem like there should be one but I looked all through my bolts and parts and there were none to be had. If so I need them ASAP Attached Images __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

01-26-2017, 11:15 AM	#2
contagious102 Registered User Join Date: May 2012 Location: Semmes,Al. Posts: 407	Re: Porterbuilt engine mounts. I would just cut a piece of 1/2" pipe and insert it between there to stiffing the mount. Good to go, can't hurt any thing , has to make it stronger . I'm sure those holes are there for different mounting options. __________________ Go Fast and Have Fun.!! My pro street build, http://67-72chevytrucks.com/vboard/s...d.php?t=551185

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.