![]() |
![]() |
#1 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
90's seat install
I installed a 90's model bench seat in the old Ramp Rat truck yesterday and just wanted to share some info with everyone who may be thinking about this mod.
The seat fits almost perfect in the truck with just a little bit of modifing. I really like they way they sit too! First you need to set the seat in the truck and then loosen the 4-5/8" head bolts in the front frame of the seat. This will let the seat frame match the holes in the truck floor board. Put the bolts in and tighten them to mark the rear frame holes. This insures the seat is good and straight when mounted. I also used 2 big nuts on each back hole to raise the seat up and make it sit better. For me anyways. ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Mar 2010
Location: Dyer, Indiana
Posts: 395
|
Re: 90's seat install
I have the same model seats installed by the PO. There was a block of wood on the left side of the passenger side seat to level them out. Did you have to block this up somehow? They are great seats though!
__________________
1969 Chevy K20 Longbed |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,445
|
Re: 90's seat install
"I also used 2 big nuts on each back hole to raise the seat up and make it sit better. For me anyways"
Right there in the last sentence
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 Last edited by kaycee; 01-28-2017 at 02:55 PM. Reason: DELETE |
![]() |
![]() |
![]() |
#4 | |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]() Quote:
Yes! ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2008
Location: Gwinnett GA
Posts: 1,803
|
Re: 90's seat install
I did the same seat, but instead used the existing rear holes and drilled holes for the front. I think I will sit a tad lower than you doing it this way.
![]()
__________________
1982 K10 SWB 1987 V20 - Sold - Doh! |
![]() |
![]() |
![]() |
#6 | |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]() Quote:
Yes it should sit lower but do you have any adjust ment? Mine has some but not much to the back but has pretty good adjustment forward which is good since I have been teaching my daughter how to drive a straight drive with it. ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2008
Location: Gwinnett GA
Posts: 1,803
|
Re: 90's seat install
Almost no adjustment. I like where it is and if my wife gets a wild hair to drive it one day, her legs are as long as mine.
__________________
1982 K10 SWB 1987 V20 - Sold - Doh! |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2009
Location: houston texas
Posts: 1,438
|
Re: 90's seat install
have you ever checked into having one of these seats recovered? just wondering if it would have to just be recovered over existing upholstery or if the old can be removed. I have one that I want do with houndstooth inserts.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,868
|
Re: 90's seat install
That looks great. Perfect color too. Back it the late 90 s I looked and looked for that very style seat, for like three years, with no luck. I ended up finding a pair of blazer buckets for a steal, and went with them instead. I still look for a seat like this, to put in a truck I don't have yet. You can never be too prepared.
The Ramp Rat is coming along nicely. ![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jun 2016
Location: Vancouver B.C.
Posts: 206
|
Re: 90's seat install
Looks great! I really like those early 90's seats.
I'm in the process of putting one in my truck. I didn't want to drill any holes in my floor so I tossed the 90's base and made up some adapter plates to bolt the bench to a set of 72 tracks using the original holes. |
![]() |
![]() |
![]() |
#11 | ||
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]() Quote:
It's coming along nicly. Quote:
![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
||
![]() |
![]() |
![]() |
#12 | |
Senior Member
![]() Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,479
|
Re: 90's seat install
Quote:
http://67-72chevytrucks.com/vboard/s...=511232&page=2 Good, luck, Rg
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Feb 2016
Location: Hebron
Posts: 1,140
|
Re: 90's seat install
wow, I like those seats. already have mine, but sure would have liked to have run across those when I was looking.
__________________
![]() 1940 Ford Dlx Coupe 1969 Mach1 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|