![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2006
Location: Utah
Posts: 1,562
|
Starter help needed
So, I picked up a new starter motor for my truck yesterday and the mounting tabs seem to be different than the original. It does not fit, and I don't see another option. I've checked out multiple sites for the bellhousing-mounted starter options and they all seem to have this "extra" bolt hole that my original did not have. This is a 4 spd manual. Please help me get moving forward on my project again
![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
Re: Starter help needed
That looks like the starter for the big trucks. The spaceing of the bolt holes were different on the 2 ton & larger trucks. Though all of them I have seen have the 3 bolt holt mounting up to 73. The 73 up with aluminum bell housing bolt up to the engine block with 2 vertical bolts. You can put your drive end housing on the new starter.
|
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Jun 2006
Location: Utah
Posts: 1,562
|
Re: Starter help needed
Quote:
|
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2006
Location: Utah
Posts: 1,562
|
Re: Starter help needed
Just called the parts store and they still have my original, so I'm going to grab it so I can swap the nose cones. Thank you for the help!
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|