WA Big Block Fan Shroud, nice, $140 shipped - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 02-11-2017, 07:43 PM

I also have a GMC V6 fan shroud for sale, the V6 shroud is very similar...

Big block part number is 3924932

*randy500* · 02-17-2017, 03:55 PM

Ttt

**71CHEVYSHORTBED402** · 02-17-2017, 06:01 PM

I don't "need" one, but can't help but ask. There's a say 1.5" wide mold top and bottom center. More often than not these are "missing". Can't say why (mold Vs cut or wear). Best I've seen was on my original. A felony "they" cut and drilled into the shroud. Anyway, I can't quite make out the top, what are yours like? How's the finish, any breaks, cuts, sagging? It does look nice. Thanks Randy.

*randy500* · 02-17-2017, 06:20 PM

I guess your saying mold mark? Don't see any marks out of the ordinary, no extra holes or damage, clean even finish on it with the thin grey streaks in the plastic

**71CHEVYSHORTBED402** · 02-20-2017, 03:36 AM

Quote:

Originally Posted by randy500

I guess your saying mold mark? Don't see any marks out of the ordinary, no extra holes or damage, clean even finish on it with the thin grey streaks in the plastic

Guess I was just wondering what the top looks like.

It's more a tab in the mold, very top and/OR bottom of the well. You either see a tab or it's flat. From the shrouds I've seen, it's usually missing on top and there's just dimples. My original has a tab on top, but not on the bottom. My replacement just on the bottom, and dimples on top as described.

More I think about it, I believe those tabs may have been for handling when these were made. Otherwise why the variance.

For what it's worth, (not much), here's the top on my original shroud Some of the tab and dimples.

**bcnya2** · 02-20-2017, 07:52 AM

If you will take $110 shipped, I will take it.

Thanks,
Greg

*randy500* · 02-20-2017, 10:55 AM

Quote:

Originally Posted by bcnya2

If you will take $110 shipped, I will take it.

Thanks,
Greg

Your a long ways away which increases shipping cost, I can do $130 shipped if that will help you out.

**bcnya2** · 02-20-2017, 11:59 AM

Would you split and go $120?

*randy500* · 02-20-2017, 01:54 PM

Quote:

Originally Posted by bcnya2

Would you split and go $120?

Ok, I will do that since I am buying other parts today. My paypal is
randy501@outlook.com
I will post tracking in paypal

**bcnya2** · 02-20-2017, 02:52 PM

Done....... sent money through paypal.

Thanks,
Greg

*randy500* · 02-20-2017, 03:53 PM

Quote:

Originally Posted by bcnya2

Done....... sent money through paypal.

Thanks,
Greg

Money received, I will ship that today.

02-11-2017, 07:43 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Big Block Fan Shroud, nice, $140 shipped I also have a GMC V6 fan shroud for sale, the V6 shroud is very similar... Big block part number is 3924932 Attached Images

02-17-2017, 03:55 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Big Block Fan Shroud, nice, $140 shipped Ttt

02-17-2017, 06:01 PM	#3
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,292	Re: Big Block Fan Shroud, nice, $140 shipped I don't "need" one, but can't help but ask. There's a say 1.5" wide mold top and bottom center. More often than not these are "missing". Can't say why (mold Vs cut or wear). Best I've seen was on my original. A felony "they" cut and drilled into the shroud. Anyway, I can't quite make out the top, what are yours like? How's the finish, any breaks, cuts, sagging? It does look nice. Thanks Randy. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

02-17-2017, 06:20 PM	#4
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Big Block Fan Shroud, nice, $140 shipped I guess your saying mold mark? Don't see any marks out of the ordinary, no extra holes or damage, clean even finish on it with the thin grey streaks in the plastic

02-20-2017, 07:52 AM	#6
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: Big Block Fan Shroud, nice, $140 shipped If you will take $110 shipped, I will take it. Thanks, Greg __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

02-20-2017, 11:59 AM	#8
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: Big Block Fan Shroud, nice, $140 shipped Would you split and go $120? __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

02-20-2017, 02:52 PM	#10
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: Big Block Fan Shroud, nice, $140 shipped Done....... sent money through paypal. Thanks, Greg __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.