03-07-2017, 05:15 PM | #1 |
Registered User
Join Date: Sep 2013
Location: Redwood city, CA
Posts: 694
|
lopsided.
I have new body mounts, new suspension and new Bilstein shocks and the truck is definitely lopsided. What should I look at / for as possible cause?
At the time this was taken the passenger front tire was flatter than the drivers side but there is clearly a difference in height here. What indeed is a possible adjustment that can be made? |
03-07-2017, 08:21 PM | #2 |
Registered User
Join Date: Dec 2016
Location: Etobicoke, Ontario
Posts: 35
|
Re: lopsided.
Just eyeballing the distance from the bottom of the bumper to the top of your front springs, it looks like a body mount issue as opposed to a suspension issue. Maybe one (some) of them didn't seat properly.
|
03-12-2017, 10:54 PM | #3 |
Registered User
Join Date: Sep 2013
Location: Redwood city, CA
Posts: 694
|
Re: lopsided.
Quick measurements today reveals that the fender is a full inch higher in thedrivers side than the passenger. Going to go over various bits with a measuring tape to find out where the differences end.
|
03-13-2017, 12:44 AM | #4 |
Registered User
Join Date: Oct 2016
Location: Oregon
Posts: 32
|
Re: lopsided.
Years back, I purchased a set of front leaf springs for my k20 and there was a little over a half inch of difference between the two. I would measure the spring arch on both leafs to see if there was a manufacturing defect.
__________________
1974 Chevrolet K5 Blazer 350/Th400/205 Dana 60/14 Bolt 36x12-16 S.S TSL Radials 6"Front 7.5"Rear F/R ORD bushings/front shackles Sky shackle flip, Crossover, rear disc brake conversion ORD steering box brace, Tom woods CV rear driveshaft |
03-15-2017, 03:49 PM | #5 |
Registered User
Join Date: Sep 2013
Location: Redwood city, CA
Posts: 694
|
Re: lopsided.
Thats a good call. I'm having a mechanic who is waaay more familiar than I check the whole thing out tomorrow morning.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|