The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-12-2017, 04:53 PM   #1
terry b
Registered User
 
terry b's Avatar
 
Join Date: Oct 2011
Location: jackson michigan
Posts: 755
Oil pressure line

Is the OEM oil line from the block to the oil pressure gage in the dash steel? 1972 402.
terry b is offline   Reply With Quote
Old 04-12-2017, 05:12 PM   #2
BILT4ME
Registered User
 
Join Date: Jul 2016
Location: Olathe, KS
Posts: 267
Re: Oil pressure line

Usually 1/8" OD soft copper.
__________________
1970 GMC K2500
Dis-use is harder on a car than mis-use.
BILT4ME is offline   Reply With Quote
Old 04-12-2017, 05:13 PM   #3
hayhauler71
Registered User
 
hayhauler71's Avatar
 
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
Re: Oil pressure line

Mine was 1/8 inch steel on my 350. Replaced with copper.
__________________
Fuzzy
hayhauler71 is offline   Reply With Quote
Old 04-12-2017, 05:26 PM   #4
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
Re: Oil pressure line

My OEM was steel that had a rubber sleeve over it. It rusted out and ruptured, so I replaced it with copper line.

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Old 04-12-2017, 05:26 PM   #5
El Dorado Jim
Registered User
 
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
Re: Oil pressure line

steel from the factory....
El Dorado Jim is offline   Reply With Quote
Old 04-12-2017, 06:15 PM   #6
davepl
Registered User
 
davepl's Avatar
 
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
Re: Oil pressure line

For what it's worth, I think copper is probably safe, but it does work harden. If you have it in a an area where it'll get repeatedly bent or flexed, it'll fail eventually. Imagine if you had a oil pressure gauge on your hood, for example, and every time you opened the hood it'd flex it.

Mild steel is much more resistant to work hardening than copper, which is maybe why the factory went that way.
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought
1969 Pontiac 2+2 427/390 4-speed Coupe
1969 Pontiac 2+2 427/390 4-speed Convertible
davepl is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com