![]() |
![]() |
#1 |
Senior Member
![]() Join Date: Sep 2002
Location: Greenfield Mass.
Posts: 551
|
front swap ???????
I know it,s been asked before . will a 76 half ton rear end fit in a 68 half ton are the width from backing plate to backing plate the same. can i buy the trailing arm brackets and coil supports and just weld them on . thank,s biglou
![]() ![]() ![]() ![]()
__________________
Certifiably crazy person |
![]() |
![]() |
![]() |
#2 |
CCRider
Join Date: Feb 2000
Location: Olive Branch,MS,USA
Posts: 2,232
|
They make a weld on kit with everything you need, Chevyduty has it in their catalog...I'm sure other venders have it as well
__________________
72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS |
![]() |
![]() |
![]() |
#3 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
the width of the 76 diff is approx 1 1/2" wider than the 68(not enough to worry about). http://www.classicperform.com/produc...ersion-Kit.htm Good luck,crazyL
![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|