|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-22-2017, 10:38 PM
|
#1 |
|
Registered User
Join Date: May 2017
Location: Elkhart
Posts: 3
|
Turns over but no spark
I have a 454 in a 1972 Chevy Cheyenne. Put a new starter in and distributor coil. (It's a hei distributor) I put the new coil in cause the truck would turn over but wouldn't start. After the coil same problem but realized it was because the battery wire from the distributor came off so I ran it directly to the battery and the truck ran great. But it obviously wouldn't shut off. So I ran a switch for the wire and now it's back to turning over but no spark. I tested the battery wire into the distributor and it is getting power. Did the new coil go bad?
|
|
|
|
05-23-2017, 07:57 AM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,715
|
Re: Turns over but no spark
Is it getting 12v with key on and while cranking? Seems you have a switching issue to me.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
05-23-2017, 08:09 AM
|
#3 |
|
Registered User
Join Date: Jul 2016
Location: Arkansas
Posts: 147
|
Re: Turns over but no spark
HEi.. has a ignition module under the distributor cap that go bad. It's a fairly cheap plug in
|
|
|
|
|
05-23-2017, 08:15 AM
|
#4 |
|
Registered User
Join Date: May 2017
Location: Elkhart
Posts: 3
|
Re: Turns over but no spark
Honestly my volt meter broke the other day so I was just using a test light. It is getting less voltage during cranking though because the light dimmed
|
|
|
|
|
05-23-2017, 08:16 AM
|
#5 |
|
Registered User
Join Date: May 2017
Location: Elkhart
Posts: 3
|
Re: Turns over but no spark
Ive heard if that too and was thinking in trying that
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
