WI 3 Stepside Fenders & Misc braces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BR3W CITY · 07-12-2017, 03:16 PM

I have amassed a few extra fenders and sets of braces during my rebuild, and I'm selling off the excess. I've got 3 rear fenders from a short step.

Third fender is a single DS from a '66 stepside (has reverse light bucket). Shallow dent on outside profile, 20min with the body hammer would take it out. Only reason I didn't keep this on my truck was that I couldn't find a PS to match it (reverse light fenders are no longer produced). SOLD Shipping can be arranged at buyer expense (greyhound or freight).

One matched pair, average condition. No major dents or physical damage on either. Some rusting starting on the inner/lower lip on both. Passenger side has more rust on the inner flange, and some separation/rust through. All the visible surfaces are straight and don't have rust holes etc. Completely saveable. [I]SOLD

All the fenders have any braces that were attached when I bought them. I also have a small stack of misc braces for these fenders if anyone needs them to round out a set. SOLD

I have a few more pics of each but I'm at the hosting limit (and we all know photobucket kaiboshed all the other hosting)

**wcstory** · 07-12-2017, 08:20 PM

I'd like the light blue set, but just need to figure shipping to see if its feasible. That would the shipped size be?

**The Rocknrod** · 07-12-2017, 09:40 PM

$7.00 a set (per fender)???

BR3W CITY · 07-12-2017, 11:01 PM

Quote:

Originally Posted by The Rocknrod

$7.00 a set (per fender)???

each brace (they are all wire wheeled and painted black). I have to double check how many of each length I have. IIRC I have one complete set of (3), and an additional 2 or 3 that don't make a matched set. I also have a couple damaged ones I'll give you for free if you buy any of the others.

BR3W CITY · 07-12-2017, 11:08 PM

Quote:

Originally Posted by wcstory

I'd like the light blue set, but just need to figure shipping to see if its feasible. That would the shipped size be?

Loose or boxed up? I've done sheetmetal like this both ways. If you plasticwrap the panels, you can reduce the shipped size a good deal, obviously at the expense of the box protections. I'd have to pack them up to really know. Based on prior experience, my guess would be somewhere in the $75-150 range for a ballpark cost. Tell me which way you'd prefer and I'll measure up.

**wcstory** · 07-13-2017, 04:18 AM

Boxed or wrapped with some scrap carpet padding. They can be tough on sheet metal items. Actually bolting them together would protect the flanges and make it a 1 item shipment. Looking at about 150 from Milwaukee to Boston. I think I bought some inner fenders from you too.

I'll call them Thursday.

As long as I'm under 175 shipped I'm still in

BR3W CITY · 07-13-2017, 11:39 AM

Quote:

Originally Posted by wcstory

Boxed or wrapped with some scrap carpet padding. They can be tough on sheet metal items. Actually bolting them together would protect the flanges and make it a 1 item shipment. Looking at about 150 from Milwaukee to Boston. I think I bought some inner fenders from you too.

I'll call them Thursday.

As long as I'm under 175 shipped I'm still in

I think you bought my inner fenders right? IIRC we did greyhound which worked fairly well. I'll get you a measurement today.

**wcstory** · 07-25-2017, 09:31 AM

Received my fenders. Props for Br3w as a seller

BR3W CITY · 07-26-2017, 03:47 PM

Quote:

Originally Posted by wcstory

Received my fenders. Props for Br3w as a seller

Thanks Bill! As always, you were easy to work with and a no-fuss transaction.

BR3W CITY · 09-18-2017, 11:49 PM

The single '66 fender and an assortment of supports are still available.

BR3W CITY · 12-21-2017, 12:06 PM

Forgot this ad was still up. The blue '66 fender is still available!

BR3W CITY · 05-01-2018, 05:58 PM

The blue fender and a few braces are still for sale if anyone is looking for this season.

**DPowers** · 05-01-2018, 08:56 PM

Quote:

Originally Posted by BR3W CITY

The blue fender and a few braces are still for sale if anyone is looking for this season.

How many braces you got left?

BR3W CITY · 05-09-2018, 10:55 AM

Quote:

Originally Posted by DPowers

How many braces you got left?

I think I have 5, but I can double check if youd like.

**DPowers** · 05-09-2018, 10:19 PM

Quote:

Originally Posted by BR3W CITY

I think I have 5, but I can double check if youd like.

Yes please. And if you have 5- how much for all shipped to 37843?

BR3W CITY · 05-15-2018, 10:48 PM

Hey sorry for how long it took. I'm only able to find 2 of them at the moment, the other two I have are missing the end tabs.

But the two good ones are available if you want them.

**DPowers** · 05-15-2018, 11:31 PM

Price for the two shipped to 37843 then?

BR3W CITY · 05-17-2018, 02:48 PM

$25 shipped for the pair. Shipping is about 12.50 Usps or UPS. Didn't look at fedex.

**DPowers** · 05-17-2018, 08:30 PM

How you want paid?

BR3W CITY · 05-18-2018, 09:49 PM

Paypal is easiest usually, pm with details

**DPowers** · 05-19-2018, 06:11 PM

$$ sent

BR3W CITY · 05-20-2018, 12:21 PM

Thanks man, I'll msg you when they ship.

BR3W CITY · 07-20-2018, 07:17 PM

The blue fender is out of storage and available.

BR3W CITY · 09-07-2018, 11:54 AM

'66 step fender is still for sale, OBO so i don't have to store it before fall.

BR3W CITY · 09-08-2018, 08:36 PM

Fender sold thanks!

07-12-2017, 03:16 PM	#1
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	3 Stepside Fenders & Misc braces I have amassed a few extra fenders and sets of braces during my rebuild, and I'm selling off the excess. I've got 3 rear fenders from a short step. Third fender is a single DS from a '66 stepside (has reverse light bucket). Shallow dent on outside profile, 20min with the body hammer would take it out. Only reason I didn't keep this on my truck was that I couldn't find a PS to match it (reverse light fenders are no longer produced). SOLD Shipping can be arranged at buyer expense (greyhound or freight). One matched pair, average condition. No major dents or physical damage on either. Some rusting starting on the inner/lower lip on both. Passenger side has more rust on the inner flange, and some separation/rust through. All the visible surfaces are straight and don't have rust holes etc. Completely saveable. [I]SOLD All the fenders have any braces that were attached when I bought them. I also have a small stack of misc braces for these fenders if anyone needs them to round out a set. SOLD I have a few more pics of each but I'm at the hosting limit (and we all know photobucket kaiboshed all the other hosting) Attached Images __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD Last edited by BR3W CITY; 09-08-2018 at 08:36 PM.

07-12-2017, 08:20 PM	#2
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: 3 Stepside Fenders & Misc braces I'd like the light blue set, but just need to figure shipping to see if its feasible. That would the shipped size be? __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos Last edited by wcstory; 07-12-2017 at 08:27 PM.

07-12-2017, 09:40 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 3 Stepside Fenders & Misc braces $7.00 a set (per fender)??? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-13-2017, 04:18 AM	#6
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: 3 Stepside Fenders & Misc braces Boxed or wrapped with some scrap carpet padding. They can be tough on sheet metal items. Actually bolting them together would protect the flanges and make it a 1 item shipment. Looking at about 150 from Milwaukee to Boston. I think I bought some inner fenders from you too. I'll call them Thursday. As long as I'm under 175 shipped I'm still in __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos

07-25-2017, 09:31 AM	#8
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: 3 Stepside Fenders & Misc braces Received my fenders. Props for Br3w as a seller __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos

09-18-2017, 11:49 PM	#10
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces The single '66 fender and an assortment of supports are still available. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

12-21-2017, 12:06 PM	#11
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces Forgot this ad was still up. The blue '66 fender is still available! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

05-01-2018, 05:58 PM	#12
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces The blue fender and a few braces are still for sale if anyone is looking for this season. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

05-15-2018, 10:48 PM	#16
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces Hey sorry for how long it took. I'm only able to find 2 of them at the moment, the other two I have are missing the end tabs. But the two good ones are available if you want them. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

05-15-2018, 11:31 PM	#17
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 3 Stepside Fenders & Misc braces Price for the two shipped to 37843 then? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

05-17-2018, 02:48 PM	#18
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces $25 shipped for the pair. Shipping is about 12.50 Usps or UPS. Didn't look at fedex. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

05-17-2018, 08:30 PM	#19
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 3 Stepside Fenders & Misc braces How you want paid? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

05-18-2018, 09:49 PM	#20
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces Paypal is easiest usually, pm with details __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

05-19-2018, 06:11 PM	#21
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 3 Stepside Fenders & Misc braces $$ sent __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

05-20-2018, 12:21 PM	#22
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces Thanks man, I'll msg you when they ship. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

07-20-2018, 07:17 PM	#23
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces The blue fender is out of storage and available. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

09-07-2018, 11:54 AM	#24
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces '66 step fender is still for sale, OBO so i don't have to store it before fall. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

09-08-2018, 08:36 PM	#25
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 3 Stepside Fenders & Misc braces Fender sold thanks! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.