427 tall deck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dean23 · 10-26-2003, 01:52 PM

Hey all, I havent been on for a while and just wanted to say I picked up a 427 tall deck with 4 bolt mains 1 piece rear main seal for 400 bucks. I cant wait to build a torque monster 496 out of it. By the way my 0 mile 400 hp 350 is for sale. email me @ dmhrehir@telusplanet.net for info.

:

Dean23 · 10-26-2003, 06:27 PM

ttt

krue · 10-26-2003, 06:57 PM

That motor is gonna be a heck of a lot of fun!

Dean23 · 10-26-2003, 11:50 PM

ya im hoping to make over 600 hp on pump gas

Dean23 · 10-27-2003, 11:59 AM

im gonna make the valve train all roller and run about 9.75- 10:1 comp at the most. these guys r gonna build it for me

www.extremeengines.com

1969 GMC · 10-27-2003, 03:58 PM

what did that come out of? a medium duty truck? i was curious about this engine too, but no one on the board really had anything good to say about them. i have seen at least 2 board members now running them. i forget names, but one is a 4x4 blazer with 44's. seems you can score the engines cheap, and they are almost always low-mile units. keep us updated on the progress.

drink2mny · 10-27-2003, 04:19 PM

A 427 tall deck is what my boss runs in his truck. Also pulled sleds in competitions .To this day no problems..
here is the thread.

I am going to try and get a good picture of it this week..http://67-72chevytrucks.com/vboard/s...threadid=74332

Dean23 · 10-27-2003, 04:29 PM

the engine is out of a medium duty truck. they r a good engine with the tall deck height all u need to do is put a spacer in to run any aftermarket intake. Plus u can build huge cubic inches out of these engines. the only other difference is that u need to use a longer distributor and fuel pump pushrod if u r going to use a mechanical pump.

Dean23 · 10-27-2003, 07:16 PM

So people lets get all your opinions on the tall deck engines

blue_69 · 10-27-2003, 07:24 PM

i have a 366 tall deck. It was in my truck but the truck is in a million peices right now but the engine has always run strong. If you dont want to spend big bucks for an aftermarket distributer do what i did have the ridge taken off a stock gm one at a machine shop then go to you local industrial supply store and buy a lock collar that fits the distributer. Then you can adjust it to the height you need.

jason

Dean23 · 10-27-2003, 07:50 PM

cool sounds good. I cant wait to sell my small block so i can start getting the machining done on the 427

Dean23 · 10-27-2003, 10:51 PM

anyone else have an opinion about the tall deck engines

Dean23 · 10-28-2003, 01:34 PM

so not one person has an opinion...with all the brains on this board....unlikely

Dean23 · 10-29-2003, 09:30 PM

Wow very hard to imagine not one of these great minds on here has an opinion about the tall deck engines.......weird in my opinion.

*rage'nrat638* · 10-29-2003, 09:35 PM

i am running a dart tall block bored and stroked to 638 c.i. 850 h.p.

Dean23 · 10-29-2003, 09:42 PM

very nice engine....im hopin to build about 600+ horse out of this engine . I cant wait to sell my small block so i can start on the bb. Thats a beautiful engine..must of set ya back a bit
. What trans r u runnin b hind it

slam33 · 10-29-2003, 09:44 PM

We use to run those on my Offshore boat. Twin 540's with Hilborn's. We had our own rev kits in them, I think Milodon has them now.

*rage'nrat638* · 10-29-2003, 09:56 PM

20,000 in the engine and 2300.00 in the th400 behind it..
just welded the 2nd gear sprag hitting 2nd at 7200 rpm

Dean23 · 10-29-2003, 09:59 PM

wow major bucks
my engine will probably end up costing me aroun 7000 cnadian
what stall r u running with that monster

*rage'nrat638* · 10-29-2003, 11:09 PM

4500 rpm stall..all roller 718/729 lift 1.8 ratio
canfield 355 heads
callies crank

Hooter · 10-29-2003, 11:42 PM

I had a 366 tall deck stuffed into a 78 caprice, it sounded sweet, looked sweet, but seemed to be gutless as hell, all bore no stroke, but I was always curious about the tall deck 427's

Dean23 · 10-30-2003, 12:31 AM

i want ot build big hp's and tons of torque out of it, im gonna turn it into a 496 stroker

10-26-2003, 01:52 PM	#1
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	427 tall deck Hey all, I havent been on for a while and just wanted to say I picked up a 427 tall deck with 4 bolt mains 1 piece rear main seal for 400 bucks. I cant wait to build a torque monster 496 out of it. By the way my 0 mile 400 hp 350 is for sale. email me @ dmhrehir@telusplanet.net for info. : __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-26-2003, 06:27 PM	#2
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	ttt __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-26-2003, 06:57 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	That motor is gonna be a heck of a lot of fun! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-26-2003, 11:50 PM	#4
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	ya im hoping to make over 600 hp on pump gas __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-27-2003, 11:59 AM	#5
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	im gonna make the valve train all roller and run about 9.75- 10:1 comp at the most. these guys r gonna build it for me www.extremeengines.com __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-27-2003, 03:58 PM	#6
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	what did that come out of? a medium duty truck? i was curious about this engine too, but no one on the board really had anything good to say about them. i have seen at least 2 board members now running them. i forget names, but one is a 4x4 blazer with 44's. seems you can score the engines cheap, and they are almost always low-mile units. keep us updated on the progress. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

10-27-2003, 04:19 PM	#7
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	A 427 tall deck is what my boss runs in his truck. Also pulled sleds in competitions .To this day no problems.. here is the thread. I am going to try and get a good picture of it this week..http://67-72chevytrucks.com/vboard/s...threadid=74332 __________________ Support The Board

10-27-2003, 04:29 PM	#8
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	the engine is out of a medium duty truck. they r a good engine with the tall deck height all u need to do is put a spacer in to run any aftermarket intake. Plus u can build huge cubic inches out of these engines. the only other difference is that u need to use a longer distributor and fuel pump pushrod if u r going to use a mechanical pump. __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-27-2003, 07:16 PM	#9
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	So people lets get all your opinions on the tall deck engines __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-27-2003, 07:24 PM	#10
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	i have a 366 tall deck. It was in my truck but the truck is in a million peices right now but the engine has always run strong. If you dont want to spend big bucks for an aftermarket distributer do what i did have the ridge taken off a stock gm one at a machine shop then go to you local industrial supply store and buy a lock collar that fits the distributer. Then you can adjust it to the height you need. jason Attached Images __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff

10-27-2003, 07:50 PM	#11
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	cool sounds good. I cant wait to sell my small block so i can start getting the machining done on the 427 __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-27-2003, 10:51 PM	#12
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	anyone else have an opinion about the tall deck engines __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-28-2003, 01:34 PM	#13
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	so not one person has an opinion...with all the brains on this board....unlikely __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-29-2003, 09:30 PM	#14
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	Wow very hard to imagine not one of these great minds on here has an opinion about the tall deck engines.......weird in my opinion. __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-29-2003, 09:35 PM	#15
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	i am running a dart tall block bored and stroked to 638 c.i. 850 h.p. Last edited by rage'nrat638; 07-12-2007 at 07:08 AM.



Register or Log In To remove these advertisements.

10-29-2003, 09:42 PM	#16
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	very nice engine....im hopin to build about 600+ horse out of this engine . I cant wait to sell my small block so i can start on the bb. Thats a beautiful engine..must of set ya back a bit . What trans r u runnin b hind it __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-29-2003, 09:44 PM	#17
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	We use to run those on my Offshore boat. Twin 540's with Hilborn's. We had our own rev kits in them, I think Milodon has them now. __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

10-29-2003, 09:56 PM	#18
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	20,000 in the engine and 2300.00 in the th400 behind it.. just welded the 2nd gear sprag hitting 2nd at 7200 rpm

10-29-2003, 09:59 PM	#19
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	wow major bucks my engine will probably end up costing me aroun 7000 cnadian what stall r u running with that monster __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

10-29-2003, 11:09 PM	#20
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	4500 rpm stall..all roller 718/729 lift 1.8 ratio canfield 355 heads callies crank

10-29-2003, 11:42 PM	#21
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	I had a 366 tall deck stuffed into a 78 caprice, it sounded sweet, looked sweet, but seemed to be gutless as hell, all bore no stroke, but I was always curious about the tall deck 427's __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

10-30-2003, 12:31 AM	#22
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	i want ot build big hp's and tons of torque out of it, im gonna turn it into a 496 stroker __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.