![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Thoughts on Master/Booster Combo
I have been kicking around the idea of getting one of these "black out" booster combos with a Wilwood master and prop valve. I am going to be using Wilwood front and rear disks with this.
https://www.performanceonline.com/19...ster-Cylinder/ My question is, POL doesn't seem to have the best reputation. Is this a wise purchase? The Wilwood master/prop is around $300 on it's own, so $200 for a booster doesn't seem to crazy. The only problem I see is it's a single diaphragm booster. My truck currently has the stock booster. As I continue to type, I am starting to talk myself out of this setup. I am concerned that a 9" single is not going to be enough. I am going to go with the Wilwood master/prop. I guess I need to determine my booster situation. Any thoughts? Thanks! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2015
Location: South of Pittsburgh
Posts: 428
|
Re: Thoughts on Master/Booster Combo
I run that wilwood setup but with a dual diaphragm booster. I only run a 7" booster. No issue at all.
I pieced my own kit together and used one of captain fabs brackets that's moves the booster nice and close to the firewall. |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,962
|
Re: Thoughts on Master/Booster Combo
On the contrary, I've always heard POL was one of the better suspension/brake suppliers to deal with. I've talked to their customer service on several occasions and they were helpful. I haven't, however, purchased a lot of stuff from them - so others may have more experience (or personal horror stories) than I do.
I would also recommend CaptainFab's setup, I bought the bracket Joe mentions and it's a very high quality product, and the good Captain is always available with helpful advice on what parts can be used to piece together the rest of the system. |
![]() |
![]() |
![]() |
#4 | ||
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: Thoughts on Master/Booster Combo
Quote:
Quote:
After seeing what you two have said, I went down the rabbit hole of boosters used in conjunction with the Captain Fab bracket... So many options, so many choices.. I saw that someone used the Inline tube dual 8" booster http://r.ebay.com/dYzdyl The price is certainly right. I know Inline make great tubing, but what about boosters? Thanks! |
||
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2014
Location: San Diego, CA
Posts: 547
|
Re: Thoughts on Master/Booster Combo
I've purchased a few things from POL and have no complaints.
Reasonable prices, fast shipping, good fitment.
__________________
Project Engine Stand 1972 SWB conversion: http://67-72chevytrucks.com/vboard/s...d.php?t=673914 1970 Nova: http://67-72chevytrucks.com/vboard/s...d.php?t=708161 |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: Thoughts on Master/Booster Combo
The plot thickens. Now POL is offering the Black Out combo in a dual 8" booster. With their current sale, that takes it down cheaper than I can piece together the parts with a Captainfab bracket. I am really torn now.
I like the simplicity of the Captainfab setup in that the pedal pushes the master directly as opposed to the linkage on the stock setup that the POL combo kit uses. Less points of failure. The only draw back I have is I am unsure if an 8" dual booster will clean my factory tilt shift arm. I like that the POL is a bolt in affair. This is a bonus as I don't have to monkey with joining the lever rod to the booster rod. Inconsequential I know, but none the less. The draw backs are unknown origins of the booster and linkage/bracket assembly. I am sure they will be fine, but I don't want to scrimp on the brakes. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2015
Location: South of Pittsburgh
Posts: 428
|
Re: Thoughts on Master/Booster Combo
![]() Only pic I have right now. Tons of room to clean my big block |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: Thoughts on Master/Booster Combo
Thanks! What booster are you using?
Last edited by beaterku; 08-30-2017 at 10:00 PM. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Aug 2015
Location: ord, NE.
Posts: 98
|
Re: Thoughts on Master/Booster Combo
Using a booster-master cyl. unit from Summit with Capt. Fab bracket. Pic of mock up before tear-down. 7 inch dual booster. Hope it works when truck get put back together next spring.
|
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: Thoughts on Master/Booster Combo
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|